Bonus Keychain Drop
Added 2023-07-24 19:23:05 +0000 UTCHello all! Here is one last bonus drop, a few key chains. These should be printed at 100% infill, and sized to your liking. Remember, the smaller you go, the harder it is to get the good detail on the first layer on some of the finer/sharper points. Most of these I had to add the keyhole to the model itself as adding the loop would make it too fragile. You will want to test out the thickness to find the level you like, I would not do less than 3mm, but that is up to you. These are saved with stock settings, so make sure you change to your pre-sets and personal settings. These work best in Bambu Studio, but I tested in prusa silver and the .3mf files opened, so let me know if you have any issues.
Here are the key chains I bought off Amazon: https://www.amazon.com/gp/product/B081PT7N4Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
https://drive.google.com/drive/folders/1x3ZOn9CIT3QNKXRR0jRVhF5urC8_wQnU?usp=sharing
