Z Review - FiiO Q1 MkII
Added 2017-12-31 06:26:03 +0000 UTCSorry for the lack of posting. Got lost in the holiday. I will up my quota!
http://amzn.to/2CthrSE -- FiiO Q1 MkII on Amazon
http://amzn.to/2CsqFhM -- FUN-TAK to attach to phone
http://amzn.to/2DBkMhC -- Anker RED USB Micro cable
http://amzn.to/2En8eMb -- OTG USB-C Short
http://amzn.to/2CsMGgk -- OTG USB-C Long
http://amzn.to/2EmnOYg -- HD660 is Bae
Wallpaper : https://i.imgur.com/LGp3gCT.jpg
Comments
The Fiio Q1 mk2 is enough to get very loud and quality sound on a dt 1990 or an Oppo Ha2se would be better?
2018-10-26 12:50:52 +0000 UTCCheck that Tascam UH 7000 audio interface.... It has a great headphone amp!
2018-09-01 23:30:37 +0000 UTCwhich is the most powerful-portable high quality sound dac/amp that can run all power hungry headphones very loud with 32bit/384khz? (I saw the mojo review,but you said nothing exceptional about It)....
2018-08-29 01:10:29 +0000 UTCNot sure. They aren't really designed for that. I never found them that loose.
ZeosPantera
2018-05-12 22:07:28 +0000 UTCone more strange question... how to add clamping force on the m40x. I have them one year and when I shake my head, they come out.I mean, they don't have enough clamping force in general.
2018-05-12 12:38:47 +0000 UTCYou would need to open the 40 and re-wire it and change the plug to do that.
ZeosPantera
2018-05-07 12:36:33 +0000 UTCIs there a way to connect m40x to balanced audio output of q1 mk2?
2018-05-05 17:01:59 +0000 UTCI'd have to go rewatch the end of the sound demo to remember. It has been a while. You seem very committed to those headphones. Just buy them. They will be strange at first.
ZeosPantera
2018-04-24 06:04:27 +0000 UTChow's the noise isolation of them? consider the pads are not leather material.
2018-04-19 18:47:05 +0000 UTCAre the Ultasone pro 900 comfortable to wear them? The ears fit in the pads? or they should be replaced by other pads (bigger)? like brainwavz xl
2018-04-19 18:44:52 +0000 UTC<a href="https://amzn.to/2GZjjb9" rel="nofollow noopener" target="_blank">https://amzn.to/2GZjjb9</a> That and some of these cables <a href="https://amzn.to/2JLxTkh" rel="nofollow noopener" target="_blank">https://amzn.to/2JLxTkh</a> and you can use the headphone out in the front to monitor.
ZeosPantera
2018-04-15 04:02:42 +0000 UTCI have a cable : two pole 3,5mm male jack to one female 3,5mm jack. It works but not well.. When I plug the headphones separately on the two sound cards , I hear full volume sound. With the cable (when I hear them together) they sound corrupted. Specifically, the sound cards I mentioned are : 1) the mixer's which I record on PC through usb and 2) the PC's which I want just to hear the sound without being recorded from PC's DAW.(It's music accompaniment on PC's)... With that information, can you suggest me something for monitoring those soundcards at the same time?
2018-04-14 23:41:11 +0000 UTCCombining analog together means you need a hardware mixer. Something cheapish will work. But they don't always have the best headphone amps.
ZeosPantera
2018-04-14 05:22:25 +0000 UTCOne other thing... How to hear the sound of two sound cards at the same time in one set of headphones?
2018-04-13 18:22:08 +0000 UTCThe Q1 does not do audio input. So you need an interface. I am not sure of your needs. The Behringer you mentioned is a good starter setup.
ZeosPantera
2018-04-12 14:28:37 +0000 UTCCan I use someway the Fiio Q1 mk2 to record the signal from my mixer to pc with high res sound quality? (The mixer is Behringer QX1202USB). Or I have to get an auio interface? If It's audio interface, tell me which I should get.
2018-04-11 12:51:06 +0000 UTCOk... the amp charges through usb input but they should include a power adapter for charging, don't you think? Maybe It charges plugged into a PC or a phone ,right? What's your opinion about Oppo Ha 2 vs Fiio q1 mk2? Which one has better sound quality? Which one lasts longer (battery) and which one gets the headphones louder volume? ALSO which one charges faster? Compare them.
2018-04-07 20:39:26 +0000 UTCThe amp is charged through the USB input. Should work with M40x for a long time. Battery 8 hours minimum.
ZeosPantera
2018-04-06 23:53:42 +0000 UTCIs this good for m40x and Samsung galaxy j3 2016? The battery lasts long? and How you charge this amp?
2018-04-06 08:57:29 +0000 UTCCant be as bad as my mate. New headphones every 6 months. I swapped the pads on his M40x’s he had for a week, cups were all beat up with dents.
Evan Van Der Paal
2018-02-09 05:16:33 +0000 UTCNo worries. They worked fine for months. I was just rough with them.
ZeosPantera
2018-02-09 04:58:38 +0000 UTCSorry, yeah it's a pain. I did test everything with a multimeter, but I didn't have anything that ran a 2.5mm balanced so I could actually test run them.
Evan Van Der Paal
2018-02-08 19:42:38 +0000 UTCActually one side of the sennheiser cable got wonky so I put more heat shrink over it so it would hold better and now it is worse. I am not worried I will just repair that side after I remove the heatshrink. I am probably going to make another one so I can have it match my soon to be purple 660s. I don't look forward to soldering those 4pins.
ZeosPantera
2018-02-08 15:40:37 +0000 UTCI'm so glad you reviewed this. I am going to get some Aeon's, please when you get yours to review can you please test those on the Q1 for me? Also I'm glad your sennheiser cable works because mine doesn't, one of the connectors didn't solder right. Going to have to fix when I have time. Looking forward to making another balanced 2.5, god those suck!
Evan Van Der Paal
2018-02-08 03:42:45 +0000 UTC
