Articulated Baby Peacock (July Design)
Added 2023-07-05 19:38:30 +0000 UTCHello everyone,
I hope you are all doing great. I'm happy to share our new design, the Baby Peacock, with all of you. It was a pretty interesting project to work on, and the tail mechanism was a lot of fun.
The head is a snap fit, while the tail needs to be glued to the body using Super Glue.
Here are the basic settings I used on my printer:
- Layer height: 0.16mm
- Wall count: 3
- Brim (only on the head and body)
- Infill: 16% Gyroid
- PLA Works Well
- Supports are not required
- Do not Down Scale
I hope you enjoy this design and feel free to share these images in Facebook groups mentioning the Artflex Patreon page. Thank you!
Download
Comments
Oh I hope everything works out for you and your family, take your time. Thank you!
2023-07-14 03:28:06 +0000 UTCHi, I will try to fix it as soon as possible once I get free, I am in bit of medical emergency of my family, Please give me a day or two
2023-07-14 03:01:02 +0000 UTCI also had a neck snap. :(
Robin Milne
2023-07-14 02:34:39 +0000 UTChttps://www.instagram.com/itsartflex/
2023-07-14 01:27:59 +0000 UTCHi, can you please send me images on IG
2023-07-14 01:27:51 +0000 UTCI’m having issues with the neck snapping when I put the head on, anyone else?
2023-07-13 21:16:43 +0000 UTCI have printed on k1 and p1p at 100% scale and it is working fine, will test on ender 3 as well, let's see how this model performe on that printer.
2023-07-12 17:53:07 +0000 UTCCouldve been my layer height as well
Dustie Chase
2023-07-12 17:39:54 +0000 UTCYes it was on bambu I may be able to pop them loose with some force but didn't want to break it and was happy with them standing
Dustie Chase
2023-07-12 17:39:21 +0000 UTCFussed layers on tail feathers at 70% Scale?
2023-07-12 17:37:39 +0000 UTCi had this issue but i sized it down to 70 but for me it looks cute with the feathers fluffed up
Dustie Chase
2023-07-12 17:21:00 +0000 UTCI have a bambu so the leveling is all automatic or did you raise it through the slicer?
Cris Shank
2023-07-11 22:43:32 +0000 UTCAll I did was make sure I wasn’t very close to the build plate. I had to good of a smoosh the first time. Can’t shrink it down at all either.
Noel Brooks
2023-07-11 20:06:47 +0000 UTCI'm having this same issue and I'm not using a brim. Can you please tell me what you did to fix it?
Cris Shank
2023-07-11 20:04:48 +0000 UTCIt was for sure a me issue. I fixed it and have a perfect print of the tail now. :) thank you. This little guy is super cute.
Noel Brooks
2023-07-09 21:42:00 +0000 UTCI will check the gap sockets. I’m sure it is something on my end. I had to replace a few things on this printer just recently and I don’t have my calibrations set exactly how it should be just yet.
Noel Brooks
2023-07-09 14:47:41 +0000 UTCI have tried to make the Gap in sockets balanced not too loose not too tight, If I increase the joint gap there is a possibility that the tail feathers will pop out. I suggest you cross-check if your printer is not over-extruding. also, avoid using brim on tail feathers instead use rafts.
2023-07-09 14:45:21 +0000 UTCSuper cute. I keep getting the tail feathers fusing at the joint. I’m hoping that is a me issue. I might have too good of a smoosh. But I do love the print.
Noel Brooks
2023-07-09 14:38:07 +0000 UTCI just printed this beauty at 90% and it came out perfect!
Laying Layers
2023-07-07 04:50:48 +0000 UTCNot yet :(
2023-07-06 18:55:30 +0000 UTCdo you have an owl or phoenix by chance?
Cedric (SideQuest3D)
2023-07-06 18:46:11 +0000 UTCScaling down is not recommended, Apologies I missed mentioning this.
2023-07-06 17:10:30 +0000 UTCCan this be scaled down?
2023-07-06 17:06:22 +0000 UTCThank you for Subscribing to Artflex :) I have used Tri Extrusion filament on Body+Face and Isanmate rainbow on the Tail+Wings+Face pattern and another 2 single colors was used on eyes,legs, and beak :D
2023-07-06 16:10:13 +0000 UTCEarned your self a long time sub. Love it. Do you know what filament produces that green/blue effect ive not seen many matte finishes on dual colour filaments
Versed
2023-07-06 15:56:55 +0000 UTCThank you 😊
2023-07-06 10:51:09 +0000 UTCThank you 😊
2023-07-06 10:50:59 +0000 UTCCool, eagerly waiting for print results 😁
2023-07-06 10:50:44 +0000 UTCIt is. As soon as 3 other printers are done in the morning I'll throw on another round with some coextrusions and rainbows.
Shayla Anthony
2023-07-06 01:35:56 +0000 UTCSo cute, made me sign up finally!
Candi
2023-07-06 00:14:24 +0000 UTCHi, I used Triextrusion and Isanmate Rainbow+ another two single color from Esun
2023-07-05 21:16:22 +0000 UTCWhich filaments ? Looks awesome.
Roberto Mello
2023-07-05 21:03:46 +0000 UTCLol, love the excitement 😁 please print in multi material 😍
2023-07-05 20:56:35 +0000 UTCI actually STOPPED another print for this... LOL
Shayla Anthony
2023-07-05 20:50:37 +0000 UTCSo pretty! Can't wait to print one! 🥰
D&K CUSTOM PRINTS
2023-07-05 20:05:11 +0000 UTC
