Update: PEKK-CF, PEI, PPS, PSU...
Added 2025-01-17 10:20:03 +0000 UTCHello, table update. 6 industrial filaments by 3DXTech printed on Prusa Pro HT90 (attached to this post). Video link is in the table (or you can find it in playlists).
Other: Great news: Tullomer printing is in progress, soon I will start the testing. First feeling, one of the strongest in XY direction, but... (very big BUT, and I don't understand why 3D Printing Nerd didn't mentioned it, he have several videos about Tullomer)
Comments
Hm. Yes, in most cases the objects are not annealed. Only nowadays I started testing materials which makes sense to anneal it.
Igor Gaspar
2025-01-17 20:44:55 +0000 UTCHello Mr. Gaspar, The PPS in the video is not very well annealed i think. Its temperature resistance is too low and toughness is too high for an annealed PPS. At least compared to what I have experienced. Although the heating test is relatively short, is it possible to put it another heating test to see if its temperature resistance increased? If you havent thrown it away.
Nezih Mert Bolgül
2025-01-17 20:39:59 +0000 UTCGreat video! Thank you :)
Kwiatens
2025-01-17 14:31:57 +0000 UTCHi Igor...another great test. I have a question. In looking at your table, I don't see an indicator if you anneal a part or not. Is that info in the table somewhere? Thanks!
Steven Bailey
2025-01-17 13:03:56 +0000 UTCI’ll keep it to myself 🤫 😊
Daniel
2025-01-17 11:40:21 +0000 UTCBecause I don't have measured numbers so far, only the feeling.. (between us, very low layer adhesion, but don't tell to anybody)
Igor Gaspar
2025-01-17 11:29:51 +0000 UTCThis is regular PPS (not PPS-CF, which will be tested soon on Qidi printers)
Igor Gaspar
2025-01-17 11:28:45 +0000 UTCMr. Igor you are keeping us in suspense! 😆
Daniel
2025-01-17 11:05:01 +0000 UTCPPS will be interesting. I have done some printing with some from Spectrum in Poland and it is promising (prints just fine on the Qidi q1 maxed out )
Luke Rickert
2025-01-17 10:33:13 +0000 UTC
