Christine

[Archived] Cow Pixie

Added 2025-06-16 19:30:51 +0000 UTC

Hii!! Happy Monday!

Day 2 coming in with the cow Pixie!

Cow pixie preview - Youtube shorts

🐄 Cow pixie 🐄

3 walls, 15% gyroid or 3D honeycomb infill. No supports.
Tested down to 50% and up to 200%. I don't recommend going below 100%
I recommend printing the pixies with 0.16 Layer height or smaller.

Editing 3MF

Avoid using the slicer's fill tool when coloring the eyes, eye shine, Snout and Udder in the 3MF files, because they are split to parts. Instead, assign color to them from the object list to make the edges look cleaner. Do not split to objects.   
The eye shines can be deleted by holding ALT on your keyboard and clicking on them in prepare tab, then right clicking and choosing delete from the drop down.
Please note that 3MFs will load with a custom profile that I used to print these models. Double check your settings prior to printing.

The clicky pasture can be found in the Patreon Exlcusives. Follow the patreon exclusives link near the top of the download post, click into the articulated folder, then you'll be able to find it in the pixies folder

I will see you guys tomorrow with the final day of pixie drops!

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐ 

This design has been Archived. If you were subscribed the month which this design was released then it will be free to download from your My mini factory account if you redeemed the file share email.

If not then it is available to purchase from the below links. Patreon License still applies to designs purchased separately. Make sure to use the discount code listed in the download post

Cults3D

My Mini Factory

✨✨-----> Current download post <-----✨✨  

🐄🐄🐄