November 2020 Release Link
Added 2020-11-07 20:32:35 +0000 UTCHello Fellow Trappers!
The November release is finally here! We appreciate your patience, We have special surprise this month! We have decided to start adding two throwback models to each months release! This month's models are Lila and Grimpaw. Originally these models where not pre supported but they are now! For those of you asking about previous models getting presupported here is how we will begin to go about doing it. We don't guarantee that they will all get the pre support treatment but if they are featured as a throwback model we will make sure to support them. The loyalty model will be getting released later in the month.
Edit: Supported models broken down into individual ZIP files for easier downloading.
Welcome pack
https://ln2.sync.com/dl/1503a8a10/hzzbhpx6-qwwhyzdu-vi8xzwz8-yvx4pas7
MyMiniFactory Store
If you've missed any of the previous months models don't worry. You can still get them on our my mini factory store. Just click the link!
https://www.myminifactory.com/users/The%20Dragon%20Trappers%20Lodge
Facebook Group and Discord Server
If you aren't apart of our facebook group, be sure to join. You can interact with other trappers and share your paint jobs as well as get feedback and help on printing. You can also join our discord server. click on the links below.
https://www.facebook.com/groups/dragontrapperslodge/
May your blades stay sharp and your flesh on your bones.
Comments
Send us a message
The Dragon Trappers Lodge
2020-12-21 17:47:01 +0000 UTCMe too. I cannot find the link to Nov release.
Nicholas Lim
2020-12-21 16:51:29 +0000 UTCSend us a message and we will get the models to you.
The Dragon Trappers Lodge
2020-12-03 20:54:07 +0000 UTCI joined in Oct and wasn't able to get on here during Nov. I can't find the link for the Nov release.
2020-12-03 20:39:07 +0000 UTCI'm in kind of the same boat, I joined on December 2 which admittedly is outside the month, but only did so because they were still showing this collection as the current release and so I thought it'd still be the current one.
Amenephis
2020-12-02 12:20:02 +0000 UTCHey there, I joined relatively late in November (I couldn't resist the incredible November pack), but have had no luck downloading the minis for November to date. I used the link provided via e-mail but could never locate a functional link to grab the set. Any advice would be appreciated. Can't wait to print and paint the Whisper Demon!
2020-12-01 20:02:05 +0000 UTCAlso folks, I found if I enter a folder and 'download all' individually it does eventually give you the zip, bit finnicky but got there eventually!
Viktor Sorscha
2020-12-01 11:15:52 +0000 UTCGorgeous models but Sync sucks - could we maybe have Google Drive in future? Thanks so much!
Viktor Sorscha
2020-12-01 09:14:27 +0000 UTCYa we’ve been considering it.
The Dragon Trappers Lodge
2020-11-29 23:56:10 +0000 UTCHave you thought about releasing through My Mini Factory each month like some other Patreons do? Your models are the best but Sync is just...well, not amazing.
Ryder Frankle
2020-11-28 20:09:24 +0000 UTCIf you still can’t get it message us and we will make sure you get your models.
The Dragon Trappers Lodge
2020-11-28 07:24:43 +0000 UTCIf you still can’t get it message us and we will make sure you get your models.
The Dragon Trappers Lodge
2020-11-28 07:24:22 +0000 UTCKeep getting either 502 Bad Gateway or 7502 Server error: Not enough space. I hate Sync so much. After about 20 tries I got the first one downloading.
Beholder.Madness
2020-11-28 02:44:55 +0000 UTCWhat issues are you seeing now?
The Dragon Trappers Lodge
2020-11-20 03:15:17 +0000 UTCI redownloaded the unsupported file today, and it looks like there's still issues with the whisper demon files for the cut version. Any chance that'll get fixed?
Court (enza.cos.props)
2020-11-20 02:49:46 +0000 UTCI just double checked and it seems the only file that doesn't print on this printer is STL_R_Wing_Bottom_Supported. even in diagonal orientation it doesn't fit. I found the unsupported files, I couldn't find them earlier because in the unsupported version of the files the wings are split into two piece instead of 3 pieces like they are in the supported. Which means they definitely wont print in this size.
2020-11-18 20:37:51 +0000 UTCThe model should fit. It’s ok if the bottom of the supports don’t. Did you check in the small version for the unsupported pieces?
The Dragon Trappers Lodge
2020-11-18 06:30:29 +0000 UTCI'm in the middle of printing out the owl Griffin Large, and I noticed that the owl griffin Large supported file (specifically R Wing Bottom, and L Wing Bottom) are oriented in such a way that they don't fit on the build plate of an anycubic photon. Which isn't a big deal, but the unsupported versions of these files are missing from the unsupported folder.
2020-11-17 22:03:24 +0000 UTClooks like its working now. Perhaps try another browser.
The Dragon Trappers Lodge
2020-11-16 22:33:28 +0000 UTCI keep getting a "502 Bad Gateway" error when I try to download the Supported Files.
2020-11-16 04:22:54 +0000 UTCI will fix it
The Dragon Trappers Lodge
2020-11-13 16:37:09 +0000 UTCThe unsupported folder for the Whisper Demon has no body file only full model and legs and base ?
2020-11-11 19:32:42 +0000 UTCGreat stuff!!! ❤
Domi Schell
2020-11-11 15:32:13 +0000 UTCWe don’t know at this moment
The Dragon Trappers Lodge
2020-11-09 18:28:05 +0000 UTCSo rad this month. Hat’s off to the artist.
2020-11-09 01:54:49 +0000 UTCOn the subject of eventually switching to MMF as your distribution method: will it be retroactive, or for new releases only?
DreadPirateLynx
2020-11-08 23:52:33 +0000 UTCThe folder may still be syncing so if you don't see them all give it a few minutes.
The Dragon Trappers Lodge
2020-11-08 23:18:15 +0000 UTClooks like a mess up. Thanks for the notification.
The Dragon Trappers Lodge
2020-11-08 23:03:07 +0000 UTCWe will keep this in mind
The Dragon Trappers Lodge
2020-11-08 23:02:52 +0000 UTCwe will check this out
The Dragon Trappers Lodge
2020-11-08 23:02:39 +0000 UTCThe whisper demon cut version seems to be missing half of the files
2020-11-08 21:28:26 +0000 UTCGreat release as always. However I was wondering, and I cant be the only one, is it possible to optimize the files to be smaller? Anything above 100mbs takes a while to load and process in slicers, and it takes up a lot of storage when you have several patreons. Ive even seen some patreons with the files under 50mb and no noticeable loss of detail. I know this is an older model but Lila and her base really dont need to be 500mb and 300mb respectively, and while most newer stuff are fairly small some of them are around 200mb which makes it impossible to fix through netfabb if theres a need. Thank you for considering this.
2020-11-08 20:02:15 +0000 UTCI’m unsure why there’s a smaller copy of one of the gargoyles, and the base only seems to fit that smaller one. Any reason for this?
Jeffrey Ernst
2020-11-08 17:28:59 +0000 UTCDS store files are added by macOS file system and only visible to non Mac users so DTL doesn’t even see that. I add them everywhere I change something on my NAS using my MacBook and only see those if I go there using windows. I think it’s a way of navigating a non OS X partition
Jeffrey Ernst
2020-11-08 17:28:06 +0000 UTCThis would be great! I've used it with other Patreons and haven't run into an issue yet. Any ETA on this?
3D DM
2020-11-08 15:32:57 +0000 UTCReally love this month's release :)
Kelly
2020-11-08 12:12:33 +0000 UTCSooooo good
Steev Turnbull
2020-11-08 01:41:34 +0000 UTCDS_Store files are included again for some reason which I dont see the point of. Models looks great!
2020-11-08 00:38:36 +0000 UTCThank You, The Dragon Trappers Lodge, that would be very appreciated.
2020-11-08 00:29:08 +0000 UTCEventually we will be switching to my mini factory for releases.
The Dragon Trappers Lodge
2020-11-08 00:16:12 +0000 UTCWe had even more problems with drop box but we will break down the zip into smaller zip folders and see if that fixes things.
The Dragon Trappers Lodge
2020-11-08 00:15:50 +0000 UTCsync.com is horrid. It's failed twice after 20 - 30m each time. Speedtest just showed that I have 140Mbps down. Honestly, the best performance I've seen to date has been from DropBox. Ever thought about switching over? Or is there something better?
James Klappenbach
2020-11-08 00:14:43 +0000 UTCarghh....tried redownloading the supported folder 5 times now. Evertime SYNC thows a network error at some point which takes forever as this service is horribly slow.
Jeffrey Ernst
2020-11-08 00:06:40 +0000 UTCIt finally made it over 400, then restarted. :(
2020-11-07 23:33:23 +0000 UTCIs anyone having issues with the supported file downloading? it gets about to 200-300 and then either cancels or restarts the entire download.
2020-11-07 23:23:41 +0000 UTClove it!!!!!!!!!!!!!!!!!!!!!!!!!
Josh Davis Miniatures
2020-11-07 20:54:49 +0000 UTC
