nicFW900 V4.00.07
Added 2025-05-07 06:33:00 +0000 UTCHoping this fixes the "N/T" issue experienced by many. I managed to trace it to the older TX power calibration system. I had left a remnant of the older system in place that I was unaware of, and this was interfering.
The power system will be changing again next release anyway, but I wanted to get this out to resolve the last problem.
I think the key tones seem to be a little too loud, I'll fix this next time.
Comments
Thanks Allerley, that's 100% correct. To elaborate, the BT version of the RT-900 uses a different processor made by JeiLi. It is kind of a proprietary processor with very limited development support. It's essentially a different radio ENTIRELY from the non-BT RT-900 and not possible to develop for currently.
Marcus Dudley
2025-05-08 21:16:26 +0000 UTCN/T issue resolved on my 900, thanks Marc.
Bill
2025-05-08 18:31:51 +0000 UTC@Patricio Marcus has answered this several time, the BT version is completely different and he has no plans to support it
Allerley
2025-05-08 14:22:56 +0000 UTCIt's only for non bt
Marcin G
2025-05-08 09:39:19 +0000 UTCToo Bad this does not work with my Bluetooth version... Any idea if that will ever happend?? I put it back in the box to return..
Patricio Ruiz-Tagle
2025-05-08 01:38:01 +0000 UTCSolved, now mine transmits
Patricio Oelckers
2025-05-07 19:55:43 +0000 UTCKann das von Artur geschriebene bestätigen. Ein und Ausschalten hat bei mir geholfen aber ist nicht stabil und senden ist dann nach eingen Verrsuchen auch nicht mehr möglich. ca. 5 Minuten dann ist kein senden mehr möglich, Nachtrag , mit vollem Akku scheinen die Probleme nicht aufzutreten
Rainer Heisser
2025-05-07 17:03:37 +0000 UTCNice work Marcus, issue has been solved.
Stacy Poteet
2025-05-07 15:00:30 +0000 UTCMenu 71 put it at 5 and see if that helps
RedJohn
2025-05-07 13:28:26 +0000 UTCHi, there's a ticking sound on RX this goes away in the menu.. any idea?
Lee
2025-05-07 12:32:21 +0000 UTCSorry cannot replicate, need more information. Every press of PTT-A and PTT-B produces output power, confirmed with meter. Bear in mind that TX Power Calibration varies from radio to radio. You may need to experiment to find the correct calibration settings for your radio.
Marcus Dudley
2025-05-07 07:56:13 +0000 UTCHi Marcus, I acted according to 'Essential Setup' and new FW seems to fix N/T issue, but noiticed pushing PTT not always enable transmit -- Screen is turning 'red' and showing TX but no output power from radio at all. This occurs randomly with new PTT -- eg steps to preproduce: PTT couple times in a row.
Artur Samborski
2025-05-07 07:26:37 +0000 UTC
