XaiJu
matmire_makes
matmire_makes

patreon


Exclusive: MMMini Bat!!

***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
It can be purchased once re-released, according to
this Schedule.

Updated!: This set now also includes a MMMini Fruit Bat! See this post for more information.

Hey Everyone!

With Halloween approaching, I though it would be a great time to make a cute MMMini Bat!

This mini is 100% print-in-place, and requires no supports.  Its a quick and easy print that scales down very well.  I've included both regular and keychain versions.  There are also a pre-painted 3MF for those who want to print it in multicolor!

Cheers!
Matt

Pictured Prints use the following filaments***
(reference the numbered prints in last image of the gallery)

(1) Amolen Red Limestone, iSANMATE High Speed PinkCharcoal Black, Cotton White
(2) Ziro Rainbow Blaze, Cookiecad Pink Ombre, Charcoal Black, Cotton White
(3) Cookiecad Grey Ombre, Eryone Red Wax, Charcoal Black, Cotton White
(4) Amolen Marble Rainbow, Eryone Red Wax, Charcoal Black, Cotton White
(5) & (7) Ziro Dreamy Dusk
(6) Ziro Sunlit Petal

*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post

PRINT SETTINGS:

Includes Standard and Keychain versions. I used these Key Rings and Binder Rings

This cute little fella scales down really well. It typically works at 40%-50%. Your mileage may vary.

*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post.

***Paid Link.  As an Amazon Associate I earn from qualifying purchases.

Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!! Exclusive: MMMini Bat!!

Comments

Thanks!

Rachel Kemp

They work at different sizes. So whatever your preference. I printed several keychains at 100% and a few at smaller scales. I don’t remember off hand but I would guess around 70% and 80%

MatMire_Makes

What scale size do you print for the key chains? or are they already sized appropriately in the file?

Rachel Kemp

Does ANYONE know a substitute for ERYONE Red Wax? I cant seem to source it quickly.

Andy Schwartz

The baby bat is awesome!!! If you could make a baby fruit bat eventually as well, that would be great! Love all of your models. You do an amazing job.

Dominic Catenacci

It is in BambuStudio at 75% scale and 0.2mm layer height. Sent!

Sean

Curious. Is this in BambuStudio? I tried a bunch of slices at various scales and layer heights and the bridging always worked fine for me in both Classic and Arachne. Can you email me the screenshots here: help@matmiremakes.com

MatMire_Makes

I found the issue. It seems the angle of the area is slightly off so that when it's sized down to 75%, the area being printed ends before it connects to the other side. I have a screenshot of it but I can't find a way to share it with you. I found it doesn't slice it that way when using Arachne wall generator so it may actually be that it's thinner there.

Sean

I had a small problem printing these. I did 20 of them and the majority of them had a part right on the edge of the chest at the wing that looked like it was printing in midair and had to be clipped off.

Sean

Yeah, it seems to be out-of-stock. Unfortunately, when Ziro filaments go out of stock they seem to just remove it from the listing completely. You’ll just have to keep an eye on it and try and catch it when it shows up again.

MatMire_Makes

I can't find ziro rainbow blaze on your amazon or anywhere...

Crissy

Super cute. I printed them at 50% and sadly the wings broke off. Even trying to be super careful moving the wing, they broke off on ever single one. Did great at 75% and 100%, love this file.

Manda Diehl

So cute!

Olga Vlakhova

Oh. My. Lanta.

Ashley

Its so adorable!

Crystal Cahoon

These are soo cute!

Julianne Zapatka

So adorable!! I am gonna have to print some for the kiddos in my family!

Robi

😱

Nikola Vonfulton

He's adorable!!

Tina Brownfield

You did it!!!!!!! I love it so much!!!

Daniel Rosenbaum

I kinda lost track of the specifics scales on some of them. Most of the multicolor ones are 100%. The big one is 175%. The yellow ones range from 100% down to 30%. The rest are between 50% and 85%

MatMire_Makes

What size are these?

Kyle

They are so cute!! I know what the kiddos will be getting for Halloween!!

Jenny Gillett

Oh my goodness! My heart can't take the cuteness! πŸ–€πŸ¦‡πŸ–€πŸ¦‡πŸ–€πŸ¦‡πŸ–€πŸ¦‡πŸ–€

Christopher

ADORABLE!!!

James Sullivan

These are awesome! Keep the MMMinis coming please!

Nishi Sood

SQUEEEEEEEEE!!!!! OMG!!!! ❀️❀️❀️❀️❀️❀️❀️❀️

HummingBird Designs

The bats are my favorite...any chance you will do a mini with the fruit bat head? That one is cuter IMHO lol

Ellyn Stephens

Can't wait to print!

Maggie Thill

Obsessed 😍

lovewillow

love this, so cute

GoodOmenz

This will be fun to make 😁😁

Jeff Houtman

All the babies!!!! ❀️❀️ My heart!!! I changed my keychain on my keys to the baby opossum already! I’m about to change them again!!! 😍😍😍

Kristi Pearce

So cute! Can I suggest a highland cow!

Haley

omg cuteeee. thank you

BabyGhoul

I never downloaded a file faster!! Halloween Stuff from here to October!!

SkullMan Prints

Yes! Just started printing for Halloween

Shaun May

Oooh he is adorable! I love him hanging upside down on the keychain

Rachel

Awesome, I Love it! 😍

Dreamweaver

I LOVE THIS SO MUCH!

Mandy Trundle

So cute thank you

braxton bernstein

Too cute!!

Mariah Vasquez

Very nice thank you so much

Brendan Wiseman


More Creators