Early Release: Ball Python Snake!!
Added 2022-10-22 18:20:22 +0000 UTC***THIS FILE IS NO LONGER INCLUDED FREE WITH SUBSCRIPTION.
Use the 50% OFF discount code if you want to purchase it.
Hey Everyone!
It's Early Release time! This Ball Python Snake is so much fun, and brings with it a whole new level of customization. The base snake model is 24 inches long, but SURPRISE... it's true length (and coloration) is only limited by your imagination and your filament supply! Each extension link adds 1"... How long will you make yours?!
The model includes 4 files. The head, the front body, the rear body, and the body extension link. The extension link and the rear body all connect like daisy-chains, via a brand new snap-fit joint. Print as many extensions in as many colors as you want! It's so much fun!
I'm planning to release this model to Cults3D later next week. In the meantime, I would love to hear any feedback so that I can address any issues before I release it there.
Happy Printing!
Matt
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post*
3D PRINTING SETTINGS
Body (Front and Rear): Print-In-Place. (I have not yet created a Built-in Brim version of the body, so you may need to generate one if you're having adhesion problems. Use a brim gap of around 0.25mm to aid in brim removal.)
Head: Snap-Fit to Body. Use the Built-in Support version. No additional support.
Body Extend Link: Print-in-place.
5-10% Infill.
3 Walls.
This has been test printed as low as 70% with full articulation. Below that, the tip of the tail may start to fuse.
Here is a quick video showing the easiest method for snap-fitting the head onto the body: https://youtu.be/DWsYu2BY7ow
*Click Here to go to the Pinned "the Hub - Info and Current Download Links" post*
Comments
There is also the Little Ball Python exclusive set. Those are separate models, that are already designed to print smaller
MatMire_Makes
2024-07-09 01:39:59 +0000 UTCIt varies by slicer, but most of them should have a scale tool that allows you to manually type in a scale percentage. You just have to type in the same percentage for each part. What slicer do you use?
MatMire_Makes
2024-07-09 01:26:40 +0000 UTCI’m not sure how to shrink all 3 pieces so they fit perfectly. Any tricks?
Camden Zaremba
2024-07-09 01:22:07 +0000 UTCHow do you shrink it down to make it mini? Im
Camden Zaremba
2024-07-09 01:21:44 +0000 UTCThis one is the isanmate PLA+ Rainbow
MatMire_Makes
2023-07-30 05:21:25 +0000 UTCIs this PolyTerra Matte Rainbow by chance?
ClearMindDesigns
2023-07-30 03:33:25 +0000 UTCi was using the isanmate rainbow, i have been printing the ball python at 75% though, on my elegoo neptune 3's. A full size is about 24 hours. Interesting to note you can get way with 5% infill though, will give those a try. My favourite print of him at the moment is using the eryone tri colour silk red/yellow/blue. It just looks amazing https://photos.app.goo.gl/74RbZksYwcjU7de96
Leigh Johnson
2022-12-12 02:03:56 +0000 UTCI usually do between 5-10%, but it really depends on the filament. If the pink/blue you have is Cookiecad Unicorn, that has a pretty slow transition time. I think that one has one full color transition every 100g or so.
MatMire_Makes
2022-12-12 01:08:37 +0000 UTCHello Matt, do you remember what infill you are using to get that colour gradient on the ball python? I usually use 10% and they seem pretty strong but I got a 2 tone pinky blue :P
Leigh Johnson
2022-12-12 01:02:23 +0000 UTCThat's going to be very different based on the type of printer. On my Direct Drive machine I print at 70-75mm/s base, and on my bowden it's closer to 50mm/s. I've never tried pushing the speed too hard.
MatMire_Makes
2022-11-30 17:31:32 +0000 UTCAt what are the fastest speeds you are still getting good results?
David Petty
2022-11-30 15:22:43 +0000 UTCThat’s isanmate rainbow PLA+
MatMire_Makes
2022-11-19 20:23:05 +0000 UTCCan you please tell me what filament this is?
Elise Dony Tribke
2022-11-19 11:02:11 +0000 UTCHow long have we gone on one I’m work on a bunch of links soon🤫🤫
jeremy andersen
2022-11-18 05:25:31 +0000 UTCYou got pics? haha! You should share them on Discord!
MatMire_Makes
2022-11-14 03:17:35 +0000 UTCSo I found if you print everything at 225 percent and add on 15 extensions you get roughly 7.5 feet
3D Printer Friends
2022-11-13 23:24:08 +0000 UTCThe head also seems a little bit loose. Other than that, the print looks awesome.
Joseph E Templeman
2022-11-04 22:12:11 +0000 UTCDid the Ball Python Snake (v02R) correct the issue with the tail coming off. I printed the v03 version and the tail popped off?
Joseph E Templeman
2022-11-04 22:11:21 +0000 UTCYes. Once a model gets publicly released the versioning starts over with the R (release) suffix, and are no longer beta.
MatMire_Makes
2022-11-03 14:43:56 +0000 UTCWas the v03beta version retired? I'm only seeing download links for v02R.
Matthew Van Zante
2022-11-03 14:41:53 +0000 UTCI actually have zero experience with belt printers, but thinking about it... I think you would want to align the ball ends of the parts toward the extruder side. If you're open to joining our Discord, I think you would have a lot better chance of getting group input there, in the troubleshooting channel. It's a very helpful community.
MatMire_Makes
2022-10-30 21:45:19 +0000 UTCI'd love to hear from anyone printing the Python on a 30... Successfully ;)
Shayla Anthony
2022-10-30 21:38:03 +0000 UTCDoing a straight layout for the Front and Rear sections for belt printing would be easy enough. However, I think I prefer to keep the middle section as-is. Leaving it up to the user to decide how many links/what length they want.
MatMire_Makes
2022-10-28 00:29:31 +0000 UTCI love this print. Quick question though, is it possible to get like a long middle section? and a set to print this on a CR30 or other belt printers? I have printed 4 already :) about to do a social media post.
Nerdy_Chicken_Schmidt
2022-10-27 20:39:52 +0000 UTCThat’s isanmate rainbow!
MatMire_Makes
2022-10-25 21:10:14 +0000 UTCSo my second snake (same filament, same printer) had an issue with the tip of the tail popping off. I heated the end and smooshed it just a bit and it stays on now, but will download V3 to make sure I have the updates. They still look great and I can't wait to see people's responses!
Shayla Anthony
2022-10-25 18:03:43 +0000 UTCwhat filament did you use on this? I love it!
LizTina Rodriguez
2022-10-25 17:17:30 +0000 UTCI printed my first one and it finished this morning. Zero issues. Eero post processing. Snapped together perfectly. Great design! Looking forward to printing others.
Shayla Anthony
2022-10-25 13:10:40 +0000 UTCAwesome!
MatMire_Makes
2022-10-24 00:45:37 +0000 UTCPrint came out really nice. Everything clicked right into place. Nice design.
Dr. C.
2022-10-24 00:45:04 +0000 UTCI don't do much on the actual print cleanup. Just file down and bigger burrs, and maybe hit it with some heat if it has stringing. I never really worry about the print lines. I'll usually paint the eyes. For my main listing models, I fully paint them with an airbrush and hand painting details.
MatMire_Makes
2022-10-23 15:45:58 +0000 UTCAlmost finished the first print. It looks like you post process the prints, what do you usually do?
James Malafronte
2022-10-23 15:00:47 +0000 UTCThis is an absolutely amazing model! The python colors are impressive. This is a master piece! Keep it up!
YourMagnet_adult_version
2022-10-23 13:16:01 +0000 UTCThis is so cool!
Jack from Layer Makes
2022-10-22 21:30:38 +0000 UTCiSanmate rainbow. You may see some familiar faces on the Amazon listing. hehe. https://a.co/d/9dB7gAt
MatMire_Makes
2022-10-22 19:07:29 +0000 UTCwhat filament is that
TomPrint3D
2022-10-22 19:05:47 +0000 UTCSmart! Haha
MatMire_Makes
2022-10-22 18:46:52 +0000 UTCPrinting with 4 centre links! 22 hours on my MK3. Magiggoo'd the hell out of this one to be safe!
zerofox3D
2022-10-22 18:45:13 +0000 UTCUrgh my son is downloading Overwatch 2 sucking up all my bandwidth, this is downloading soooo sloooow booooo.
zerofox3D
2022-10-22 18:29:33 +0000 UTCit's fixed now!
MatMire_Makes
2022-10-22 18:28:19 +0000 UTCI fixed it. thanks!
MatMire_Makes
2022-10-22 18:27:57 +0000 UTCCan’t wait to get home and make this
Mike's Art Lab
2022-10-22 18:26:31 +0000 UTCGoogle link is borked, extra characters at the start! Can't wait to print this!
zerofox3D
2022-10-22 18:25:37 +0000 UTCwont let me download the beta python
Daveks6 k
2022-10-22 18:24:52 +0000 UTCI’m soooo excited!!
Lisa Bergeron
2022-10-22 18:24:40 +0000 UTCOMG! I smell a lot of fun here and going to print one right now!
3DNestCZ
2022-10-22 18:23:25 +0000 UTCThat's cool thank you!
D&K Custom Prints LLC
2022-10-22 18:21:57 +0000 UTC
