Patrons Only Sneak Preview: Quadrysteria Rush 4"
Added 2016-06-29 14:01:58 +0000 UTC
Comments
Great, will definitely be interested in watching the tuning videos if you put any up on the 4".
David Hayling
2016-06-30 01:16:00 +0000 UTCIt's getting in the way of the bootloader button that is the real problem. On the X24 build, there was enough space between the RROSD and the F303 that I could mount the buzzer on the bottom of the F303, but not on this one.
Joshua Bardwell
2016-06-30 01:07:32 +0000 UTCYeah for sure. I will probably do another tuning video as well, just to see how the 4" tunes differently.
Joshua Bardwell
2016-06-30 01:06:37 +0000 UTCNice and I fully agree on the antenna mount - I mounted them ONE TIME out of the top and that costed me much antennas - even the Antenna works as a hook at gates sometimes ;) I don't get why many still put the Antenna out there. Even Catalyst Machinewroks had that on the top with the speed addict 210. After short feedback to them they will provide an alternative printpart for rear horizontal antenna mounts! I like it when companys are open for this small but helping changes :) Keep flying!
Björn Neuhaus
2016-06-29 23:56:05 +0000 UTCNice Build Josh! Think you can video the Maiden so we can see how it flies?
David Hayling
2016-06-29 19:16:29 +0000 UTCI have one of the smaller buzzers and what I did was do a bit of a Z bend one of the legs to get the terminals the right width and soldered the buzzer directly to the f303 board. One edge sits a bit in the boot loader button housing but it's not in the way. I used hot glue in several places to keep it from vibrating. It came out real slick.
Carlos Martinez
2016-06-29 16:00:27 +0000 UTC
