C4D cloth 2023 partD (VIDEO TUTORIAL)
Added 2023-02-01 18:59:01 +0000 UTCHappy month everyone!
4th part of c4d cloth series with an example from the almighty Future Deluxe. It's a commercial they did for Bang&Olufsen which has a ton of amazing cloth there. Was a nice challenge trying to recreate some parts of this.
Let me know what you think!
Cheers,
T.
Comments
hey, i think unless you use the exact c4d version, u need to rebalance all the forces. As in every version, maxon changes them internally.
Thanos Kagkalos
2024-01-24 18:08:47 +0000 UTCHi! So I am following your tutorial, using the same numbers as you; when I add the rotation, it just kinda slowly rotates the whole object; it doesn't shrink nor does it gives those pretty folds. What am I doing wrong? I rebuilt it 3 times.
Pete Sussi
2024-01-24 18:04:20 +0000 UTChey there, I think u need to balance the forces and/or the fields so they dont overtake one the other :)
Thanos Kagkalos
2023-05-27 18:19:57 +0000 UTCHello :) I'm stuck when I add the rotation, its making my all plane rotating but doesn't affect the turbulence. Do you know why? Thank you!!!
Lauren
2023-05-27 15:13:40 +0000 UTCAbsolutely Stunning! Thanks!
Nikhil Shahapurkar
2023-02-12 12:32:02 +0000 UTCno worries hehe. I might do something like this in the future, i rarely do tear stuff though
Thanos Kagkalos
2023-02-03 17:41:14 +0000 UTClol for me its the opposite i think wires help me check the mesh better :D but good to hear that i ll keep it in mind going forward ahha
Thanos Kagkalos
2023-02-03 17:40:52 +0000 UTCjust kidding, I just wanted to press N-A myself to check those wrinkles so I was really happy when you did haha
Rodrigo Ortega
2023-02-03 17:38:08 +0000 UTChaha why? screen recorder glitching much? compression doesnt like wireframe lol
Thanos Kagkalos
2023-02-03 17:35:31 +0000 UTChaha you are correct ... you did not show, but i wanted to try using your cloth tutorial on a low poly baseball glove to help drive the higher dense glove... and at the same time convert that high poly glove into a cloth sim to tear in specific areas... tryed a few ways but not very successful, but appreciate the commenting.
edward a gomez
2023-02-03 17:34:00 +0000 UTCGreat tutorial, but I'm not gonna lie, the best part was when you turned off the lines on the viewport lol
Rodrigo Ortega
2023-02-03 17:25:16 +0000 UTCI m not sure to which part u are referring to as I do not showcase tearing here. Neither I use belt. Belt is not supposed to be used with the mix animations now. Its old way of setting up things. In any case yes, please check on project files
Thanos Kagkalos
2023-02-03 17:13:57 +0000 UTCi see... i also tried it using a vertex map on a belt and i thought that would solve it but does not seem to work on 2023... it did on R25 ...i m sure its user error
edward a gomez
2023-02-03 17:11:31 +0000 UTCnope :) u can use it to drive movement but not tearing no
Thanos Kagkalos
2023-02-03 16:45:39 +0000 UTCQuestion.... can you attach a high res plain to a lower poly alembic cloth sim and still have the high poly plain tear in certain areas ....
edward a gomez
2023-02-03 16:44:35 +0000 UTCwell now that i understood 'em i will!
Benjamin Rouyer
2023-02-03 09:36:11 +0000 UTCabusing it ftw hehe cheers
Thanos Kagkalos
2023-02-03 09:33:10 +0000 UTCyour vertex map management is so on point, tx Thanos!
Benjamin Rouyer
2023-02-03 09:32:32 +0000 UTCHi Thanos, what do you mean by 'sds it via Tags'?
Chronox
2023-02-03 08:24:51 +0000 UTCcheers bud
Thanos Kagkalos
2023-02-02 11:16:04 +0000 UTCAmazing tricks
FabioSai
2023-02-02 10:33:23 +0000 UTCthanks for the input. My final sim was 600-800 i think and u can sds it via tags and not actually. U dont have to go the alembic route. Either it fits in gpu with no errors or it doesnt there is no way around it unfortunately
Thanos Kagkalos
2023-02-02 08:04:14 +0000 UTCHey Thanos, I was able to push the resolution of the plane to 600x600 without any problems. I didn't simulate it though, but rather export as alembic and then subdivided geo for even better resolution. Just wanted to share this cause I know you said in the video that you couldn't push resolution of the plane pass 400x300. I hope this is helpful info. neb
Nebojsa Visnjic
2023-02-02 06:40:17 +0000 UTCcheers broo
Thanos Kagkalos
2023-02-01 21:53:17 +0000 UTCGreat one bro!
Mikhail
2023-02-01 21:52:25 +0000 UTCyes will do in all of these scenes :) thanks for the kind words
Thanos Kagkalos
2023-02-01 21:48:07 +0000 UTCcheers bud!
Thanos Kagkalos
2023-02-01 21:47:49 +0000 UTCThank you Thanos! As always amazing work and clear technique. It would be super cool and a nice finishing touch if you can show how did you lit the scene in Octane.
Nebojsa Visnjic
2023-02-01 21:46:55 +0000 UTCLove it! ♥
Never Sleep
2023-02-01 21:33:44 +0000 UTCcheers bud!
Thanos Kagkalos
2023-02-01 20:51:20 +0000 UTCyes ofc :)
Thanos Kagkalos
2023-02-01 20:51:10 +0000 UTCvery nice-thx- will you also show us how to setup the light for such scenes in oc-
Michback
2023-02-01 20:44:07 +0000 UTCGreat problem-solving and techniques, going to give this a try later and see how my GPU handles it!
Hoi
2023-02-01 19:38:57 +0000 UTCIndeed :) If u keep it simple with ur thinking in dynamics, ur halfway there! cheers
Thanos Kagkalos
2023-02-01 19:32:42 +0000 UTCThe approach on this one was a lot simpler than I thought hahah. Great as always!
Ian Homan
2023-02-01 19:30:42 +0000 UTC
