I've just added some new iron door variations to 000 New Files\012 Craggy Keep and the single sided demon head versions have a removeable gem... who knew that the reason the key wasn't working was that the gem was missing.
012 CK Iron Door Top has been updated to v02 with some extra little supports added to the gargoyles to help them print a bit better. These should just pluck of easy once printed :)
I've just added the pieces to build an Iron door entrance piece as well as some arches to be used over the walkways to the folder 000 New Files\012 Craggy Keep on the Dorpbox.
The Iron Door piece is split top and bottom so you can use just the top half for maps that start at ground level or add the lower stair part to take the upper floor to 90mm.
There's LED holes in the braziers with enough space for the normal balloon LEDs to light the flames up.
Supports are built in...
I've just added the first of the risers for Craggy Keep as well as all the edging pieces and stairs to the 000 New Files folder on Dropbox. There's also a forced perspective version of the stairs if you're wanting to keep things flat - Not sure why you would when the raised version look so awesome ;)
As usual it's all support free but I've added some support tabs to the ends of the chains on the edges to help hold them down on the print bed.
I'll be working on the rest of the ri...
I've just added the first of the Craggy keep files to the 000 New Files folder on the Patreon drive. As well as suitable for Quest 10: Grin's Crag in the Kellar's Keep quest book they're modular and reversible so you can extend the crag or make it smaller. They're built "on system" so will work with all the other pieces - riser, stairs etc.
I'm finishing up some false perspective stair tiles to be uploaded along with the boulder tomorrow and have some ideas sketched out for the forge a...
I've just added a large selection of scatter pieces for Ghoulburg to "000 New Files\011 Ghoulburg\Scatter"
In the second pic above is an example of how you can lay the files on top of each other in your slicer or 3D software to combine them into larger custom pieces of scatter.
The chained coffins will need supports if printing FDM or you can lower them on the print bed slightly to cut off the chains on the base if you just want to use them laying flat.
I'm finishing up t...
I've just uploaded the C1 Statue for the lower crypt to "000 New Files\011 Ghoulburg\Cemetery"
There's a few options for what to include in the brazier and LED holes for the brazier and head if you want to print in a clear filament to get the gems and runes on the head glowing :)
I've just added the C tiles to the Patreon Dropbox folder "000 New Files\011 Ghoulburg\Cemetery"
There's also a sneak peek in these pictures of an additional piece for inside the crypt that I'm working on now :)
There's been some great prints being posted over on the Discord so make sure you head over there and check them out https://discord.gg/uZCzrthC5u
Just a small update in the "000 New Files\011 Ghoulburg\Cemetery" folder. I've added tiles F & G to finish up the exterior.
I've finalised the layouts for the interior today too so will be cracking on with those tomorrow. I've got a few options in mind to allow for some different scenarios based inside the lower crypt :)
E tile for the Cemetery is now in "000 New Files\011 Ghoulburg"
There's a new gargoyle holding a shield for this one and an option for either the rock platform or just flat grass - the rock is a lot more epic looking though :)
All the wall Iron pieces are the same as the standard Ghoulburg wall sand can be found in "011 Ghoulburg\Walls And Edges"
I've just added all the tile D files to "000 New Files\011 Ghoulburg\Cemetery"
There's some split versions of the large tile in there too that will fit on Prusa Minis.
The gargoyle can be swapped out with a brazier if you want to add some LEDs :)
I've just uploaded to 000 New Files\011 Ghoulburg\Cemetery the first couple of tiles for you all to start printing. The plan for the final design has evolved a bit over the last week and can't wait to show you the completed piece now most of the parts have been sculpted :)
I have a lot more of the headstones made too so will be doing some separated versions of these similar to the Monument B to be used as scatter.
I've also switch to .3mf files as they're about 1/3 of the size o...
I had hoped to get this finished before the end of the month but it's turned into a bit of a mammoth sculpt so I'll be needing a few more days on it. This is made of of 5 larger tile pieces similar to the Apothecary so will be a nice simple print and build. You'll be needing the current crypt if you want to build it exactly as it is in the layout so you'll have a head start on the printing if you have that already.
I've moved all of the previous months files out of the new files folder...
All of the Dungeon wall B variations have been uploaded to "000 New Files\002 Dungeon Set\Walls\DUN Wall B"
You can swap these out for the wall A's in the build guide or mix and match per room.
Just added a few more floor caps in addition to the studded versions (and renamed the studded ones too) - 000 New Files\001 Dungeon Set\Utilities\DUN Floor Caps
2022-02-01 07:39:53 +0000 UTC View Post
The complete HQ build guide using the new custom rooms is finished!
You can find TDRQ HQ Build Guide.pdf in the 101 HQ Pre-Built folder. I've moved all the old fixed layout tiles into an OLD folder and would advise against printing these going forward - unless you just want to play on the base layout or have something 3D to hang on the wall :)
I've created a lot of new wall files to add a load of variation (currently only in the A style but it's fine to mix and match for differe...
"DRMCv2 Clip Half 4.75x1.5mm Cyl 1x" and "DRMCv2 Clip Half 4.75x1.5mm Cyl 2x" has been added to "000 New Files\Tools\Clip System v02"
These should make it a bit easier to find magnets in place of the 5mm ball ones and give a very strong connection between pieces too.
With the double magnets make sure one side is positive and the other negative and all clips are placed in the same orientation. I find it handy to have a single tile as a master with the magnets in to use as a templ...
Apparently the files were too powerful for Dropbox and the link got temporarily suspended.
I've upgraded the account so we now have the maximum of 4tb of daily bandwidth. This should give us enough to cover new arrivals wanting all ( 23gb O_o ) of files in one go as well as any new releases.
https://www.dragons.rest/patreon should be working again now with the new pa...
With the release of Dungeon Bowl next week I wanted to create some new tile arrangements that would allow for the more flowing dungeon style layout - similar to Advanced HeroQuest. I found the new configuration I came up with also works great for the original HeroQuest. As everyone is getting their new sets I created a set of tiles to work with the HeroQuest board layout.
All these can be found in the folder "000 New Files"
Building the board like this solves the offset wall pr...
I've started adding a lot of new tiles for the Ghoulburg set to the "000 New Files" folder. These are paths and grass areas. I have some single tiles too add in the morning. Everything tiles seamlessly. I'm also putting together a batch with walls, trees and graves built in :)
2021-10-31 16:09:52 +0000 UTC View Post
I've just added a version of the plinth with an LED brasier to "000 This Months Files\011 Ghoulburg\Plinths". There's space inside for one of the LED party balloon lights - I use ones similar to these https://amzn.to/3uBAKnP
A little tip for printing the flame, if you print it with 0 infill and 0 bottom layers it will only print the perimeters (2 should be enough) and will let a lot more light though a translucent PLA.
A new batch of files has been added to "000 This Months Files>011 Ghoulburg"
In the Crypt folder you'll find a Scroll, Statue and Urn to be used in the nooks on the outside of the building. There's a new Monument tile and a new folder with various plinths.
I'm working on an LED version of a new plinth that will be ready tomorrow and I'll package everything up and send out the download links if you don't want to download individually now.
Some new files have also been ...
GB-0012 Crypt A updated to v03 now with 100% more clip holes added - Was very late when I amended v02 last night and missed adding the clip holes into the base, sorry :/
2021-09-09 20:17:36 +0000 UTC View PostI've just updated GB-0012 Crypt A to v02 in the folder "000 This Months Files". The locating pegs were a bit too tight on the tolerances with the roof section so I've made them a bit smaller to save the need to file them down if you're finding them not fitting very well :)
2021-09-09 13:56:03 +0000 UTC View Post
The files for the Crypt have been added to "000 This Months Files"
Can't wait to see these ones printed and painted.
Tomorrow I'm going to be working on a statue to fit in the exterior niches :)
So very nearly finished on the Crypt. I had hopped to have it out today but I still have a few bits of the sculpting to finish off tomorrow I'm afraid. Had a few issues with getting the model files nice and clean for printing and got carried away adding some of the little hidden features which pushed the deadline out slightly.
I wanted to get a few test renders done of where I was at though to show you what I'll be sending out end of the day tomorrow :)
I had hoped to upload a few files today but the leaves on this one took ages and the crypt pieces I'm working on is a couple of days away and I'll send around a download link for both the latest files then - Can't wait to show off the crypt :)
I'll keep the current monthly code going till half way though August so no one misses out but keep your eyes peeled here the next few days :)
Tile "GB-0007 3x4 01A v01" in the pic is in the folder 000 This Months Files\011 Ghoulburg\...
I've just added the 4 new floor tiles, a new reverse corner wall piece and a hanging cage with skeleton edge piece to go with the Ghoulburg tile set. Files are in "000 This months Files" on the Patreon drive and keep an eye on your messages for the the direct download link.
I have 1 more exterior wall to do next then I'll be working on the lychgate doors :)
I've just added the 2 new 2x2 floor tiles and a new tree edge piece for Ghoulburg to "000 This months Files" on the Patreon drive.
Keep an eye on your messages for the the direct download link :)
I've just added the first couple of the 2x4 floor tiles for Ghoulburg to "000 This months Files" on the Patreon drive.
These new tiles have sculpted edges that allow the clip holes to be hidden when using the half clips with magnets.
I've just added some new files to the folder 002 Dungeon Set\Risers. These contain some new cloister wall arches that go great with the modular stairs as well as some riser blocks that can be used in place of a floor tile to add some support for upper floors if needed.
These files are also included in the monthly download link everyone will have just got messaged.