Lilykill

Next Project

I have just finished and uploaded the Dead Space Helmet assembly drawing so now its onto the next projects. I will add the previous models on the poll that I didnt do as well as adding more. Take a look, see what you think and cast your vote, It'll be great to see what you guys want.

Dead Space Plasma Cutter is Complete

Just a quick one and as it says about the Plasma Cutter is done, cut up and the drawing is all done. The files are attached below and also in the dropbox folders. 

I have decided to do the level 2 helmet from the game as it looks the coolest and doesnt look like it has a load of unnecessary geometry on it but still looks practical in its design. I will be starting that tomorrow.

Hellboy Samaritan Pistol is done

This took longer than expected due to not having a lot of time recently at the PC but its finally done. I have attached the STL's and I will be working on the drawing next. I was not able to incorporate a working trigger as the frame in that area was just too thin and small that I didn't want to weaken it anymore for the purpose of adding that single feature.

Once that is done I'll start on the Dead Space Plasma Cutter as its the next on the list and I might repost the print list again ...

Arc Reactor and Mals Pistol are done

Both Iron Mans Arc Reactor and Mals Pistol from Firefly are both complete along with their drawings and availble to download both here and on Dropbox.

Following the next model from the poll, I will now be moving onto Hellboys Good Samaritan Pistol

One Step Ahead of You

Since the posting of the poll, I've been keeping a watchful eye on what you guys have been interested in and Mals Pistol from Firefly was the highest voted so I started on it a few days ago. I have only done one side of the pistol so far and just mirrored it for this render but it does look quite good so far.

As for the other projects on the post, I will be taking the top-rated projects and working through them in this order;

Iron Mans Reactor Display, Hellboy Good Samaritan, Dead...

Whats on the Menu

So below is my current wish list of props I have on my whiteboard that I add to when I want get inspiration for another project. They are in no particular order and range from quite simple to complex projects so take a look and see what you think and hopefully there is something on there for everyone.

The only one that wont stand out to many is the 'Scorn Pistol'. This is a game coming out soon-ish that is basically a horror/shooter with a heavy H.R Giger theme. Now I hate horror games ...

The Mummy Book of the Dead is complete

Hello all, sorry for not putting a post out in so long but I assume that most of you follow me on at least one of the social media platform that I post on to see my progress as I go.

The whole time I have been diligently working away on the Mummy Book of the Dead which is now complete except from a working key. I have fully modelled the key including its debossed hieroglyphics, I'm just working on the latching and unlatching mechanism to open and close the 'fingers' of the key. The file...

Cyberpunk Silverhand Custom Ready to download

So after much toil the static Silverhand Custom from Cyberpunk 2077 is complete and ready to download from Dropbox. I say static as I'm working on a version of is that is semi functional as in the barrel spins when the trigger is fired. Its going to be something I havent tried before and hopefull it'll work as it will be so much cooler. 

Once this is done I will partial move back to the book of the dead as I dont want to just hammer through cyberpunk stuff and get burnt out on it. ...

Dropbox File Location

I've seen a trend recently that whether its spread via word of mouth or whether it’s just a coincidence but I've had at least 20 of so people in the last 3 months join my Patreon and then instantly cancel. I would assume they are doing it to get the Dropbox link and then not pay for it. In the past I haven’t bothered changing the Dropbox location just so it’s not confusing for everyone following an ever-changing link. But, with the recent spree of people joining and cancelling I felt I ...

Its been some time

Hi Guys, I apologize for taking so long on making a post but I try to keep my social media channels up-to-date and I sometime forget that not all of your would see those posts as well.

Shown in the images above I have complete the backpack, chest and biceps of the T60 so just have the forearms and hands left. The plan is to have a model captures all the detail but be individual pieces for those who want to do there own thing, and then version with a working mechanism for the finger move...

RIP AND TEAR!!

After 4100 features the Doom Eternal Super Shotgun is complete. The image above is a bit of a side by side of the Doom 2016 super shotgun to give you an idea of the size difference and its a thicc boi. As there is a load more detail work all over the weapon I would emphasize that having a machine that can print with a 0.25mm nozzle to atleast 0.1mm layer or a resin printer is advised. I've seperated all of the detail work from the main body so normal print settings can be used for the rest of...

Pit Droid ready and Super Shotgun on the way

I have finished the Star Wars Pit Droid and the files are available below and in the dropbox folder. I really wanted to have it as a fully foldable replica but looking at the joints from the animations of them unfolding they are just not possible as they are  just to small to be printed and strong enough to survive even one use. But, the arms, wrist and legs are all moveable due to the ball joints and I've put points in for bolting them shut so you can adjust the tension in the ball join...

The Jumanji Squad - tokens complete.

After many hours within Blender I've now completed all 4 player tokens for the Jumanji board and they are with the rest of the STL's to download. For the Tinkerer tier supporters, the Blender files are with the rest of the CAD files.

As I want this build to be more epic than before I'm looking to mount a screen inside running a rasberry pi that I've seen tutorials it running as a dedicated video player that loops videos.   So knowing that I have now enlisted the help of a frie...

T60 Power Armour Thighs Complete.

Though it feels like a long time I've finished the thighs of the T60 power armour and they are in the dropbox folders.

I've now started on the legs of the pit droid and its going well. It shouldn't be too long for me to finish but the only thing that will take time is how to get the joints to move so it collapses.

I've also made progress on the Monkey character of the Jumanji board and I...

Jumanji - The last details

The caption image shows my current progress on the front inlay of the jumanji and hopefully it's noticeable then I'm starting to improve on Blender. I'm adding all the small hand-carved details so that its not just flat surfaces and I've taken a slice off it to test print on the resin printer to see how good these details come out. Once I've added these details and I fixed a few issues with the meshes in Blender I will then cut the board up for printing. My plan is to release the files as-is ...

Just a quick update

I've uploaded the shin and foot armour of the Fallout 4 T60 power armour. Both the STL's and CAD files for these are in the dropbox folders as they are too big to put on as attachments to this post. 

Jumanji Progress

As you can see from the image above the front is starting to actually look like the board game box. I'm now working on the scenery in the top portion and after that I will move onto the portrait pieces in each of the corners. For this model I won't be able to add the very fine detail such as all of the ribbing on the leaves, the leaves on the tree scenery or the smoke from the volcano as these are handmade inaccuracies of the woodcarving. Overall shape/form of these pieces will be there  ...

Big Update

It's taken some time to get some of the latest project finished as they've all required moving parts but I've finally done it. I have now uploaded The Judge Dredd Lawgiver Mk2 with the working trigger and bolt and the Doom Super Shotgun. They don't needed three to four different prints as sometimes moving holes one or two millimetres or just testing how much press the spring force exerts to be easily operated cannot be done without a prototype. Especially the Doom Super Shotgun were the catch...

Doom Super Shotgun and other updates.

Even though I am still progressing with the T60 build, which is starting to be a bit of a pain working with so many surfaces, I am still progress with other stuff on the side as I find it quite boring to just to stick to one project. This has been my current lunch break project, the Doom Super Shotgun. I have wanted to do this for some time and I haven't done it till now as trying to get reference shots for it is quite difficult even in game. But I managed to work out though many hours of sea...

Quick Bioshock Update

I'm currently replaying Bioshock which may lead all the way to infinite and I've found how and have now extracted all the meshes from all three games. This makes it a lot easier to create models as you have something to get all your setting out the basic model shape and ensures I don't have to go back and fix/adjust any parts of the model that are not to scale. So, I modelled the plasmid bottle, eve hypo and the self-destruct override key and both the plasmid bottle and eve hypo are hollow fo...

I am the Law!!!

For those who follow my social media profiles you would have seen that I've said I've had some issues with the base mesh files I use to get the scale of Fallout game item right which has really hindered the progress of the T60. I have only recently been able to get back too it as the VAR didn't has a solution for it.  So in that mean time I've concentrated on doing this prop as I know I could did it in no time. 

The reason why I choose the Lawgiver Mk2 was because I saw that a...

T60 Update

As much as some of the geometry has been a real pain this is my progress so far with the T60 Power Armour. My plan is to roughly model the whole armour so its accurate and then go back and adjust what need to adjusted so that the armour can actually move correctly and not just cause constant interference. 

I have uploaded the build drawing of the Constantine Holy Shotgun and it's in the zi...

Constantine Holy Shotgun is complete!

The Holy shotgun is complete and and I've printed most of the FDM parts and I'm making my way through the other parts I'm printing on the Anycubic Photon. The STL's are attached to this post and are also in the dropbox folder, the CAD files are also in there respective folder.

For the layout of the files, I have split them up so as to reduce print time on the larger pieces. So for parts like the barrel I have the 0.4mm set of files for anybody just to print it as is then I have the 0.25...

Star Wars BD-1 Droid

After E3's EA play gameplay of Fallen Order I really wanted to model the new BD-1 (buddy) so spent saturday night and early into sunday morning completing the model with some time over the last couple of day to fine tune it. 

The exploded view above show the breakdown of the model and the empty space in the head and main body can be used for any electronics you want to put in it. The rear ...

What to do next? and added extras

Below is my compiled list of what I would want to build next, everything on this is list is what I want to do at some point but obviously I need to start somewhere. Some of these are from the old poll as they are all still relevant. I know it only gives you one vote but please say in the comments if you also like another option

Additionally to new projects, if you have seen on social media I recently tested the water of some replica technical blueprints of the fallout 10mm pistol that e...

T60b Helmet is here!

After having a long bank holiday weekend of a lot of modelling and not much sleep I have complete the T60b helmet along with the BOM and drawing needed for the build. I have attached the STLs and drawings in this post but the STL and CAD files are accessible in their respective dropbox folders.

As for the Constantine Holy Shotgun (shown below), I'm progressing well with the scrollwork with only the text on the sides of the barrel and a small amount of scrollwork to finish on the top. I ...

Constantine Holy Shotgun and T60 Progress

I have really enjoyed modelling the fine details on the Constantine shotgun as it will look so good printed. If you follow me on social media you would have seen my recent post where I test printed a FDM and DLP version of the detailed disc in the images above, the prints are below (FDM on left, DLP on right). 

From these prints I will add some more detail but no much to the first version ...

Hemlock and F ray are done!

Attached are both the files and drawings for the Apex Legends Hemlock and Futurama F ray. The Hemlock I've previously been working on but the F-ray (shown below) is just something I thought i would do this week as I've been watching Futurama while modeling stuff. It was a fun one to do since it was simple and it felt like I did it so quickly compared to all my other models. 

2019-04-27 06:33:21 +0000 UTC View Post

M41A is complete and the Apex Hemlock is on the way

It's taken some time but a lot of the large parts are printed and I'm happy to say the M41A pulse rifle is complete. Attached  below are the STL's. I have now started on the accompanying drawings to help with everyone's build. Here a quick view below. For the Tinkerer tier supporters, the CAD models are in the Dropbox folder. As for the Builders tier here is the dropbox link again - 

2019-04-01 21:02:59 +0000 UTC View Post

Listening to feedback

I've had a few of you guys asking for some build help on some of my older builds which didn't create an drawings for. As the top image shows, one of the drawings is the NCR ranger helmet which I do admit could be hard to follow without something like this. I have also done the Fallout 4 Laser pistol as I know the reload mechanism could be a little difficult to understand.

For my proton pack bui...