Good morning everyone,
Just a quick post to share the newest file available, the wall mounted Darkrai is in the Dropbox folder now for you. You may need some supports under the arm and a little under the head, but other than that it's a pretty straight forward print.
Have a good one!
2022-10-10 11:10:08 +0000 UTC View Post
Ready and waiting in the Dropbox is this Mewtwo skull! There is a solid and a hollow version and a FDM version of both that has a flat bottom for easier printing.
It will need some supports, but as always, do what feels right for your printer.
It's Thanksgiving this weekend for those of us in the Great White North, so Happy Thanksgiving from me to you if you're celebrating!
Have a great weekend everyone, more models coming soon!
The first of the Poll Picks is available now for all Patrons! Mega Gengar should be a pretty straight forward print and really only need supports under the torso to make sure the detail comes out nice.
You can find the files in both the October specific folder and the general Pokemon folder.
Not much else to it so go get printing!
2022-10-04 17:19:40 +0000 UTC View Post
Just a quick post to let you know that there are the new files available that were mentioned in yesterday's post. They are in the October folder as well as their permanent home, the Halloween folder.
Charmander will need supports under the top right tooth and wherever else you feel your printer will need them.
Squirtle should be good to go without.
The Squirtle Skull has been oriented in the way that I feel will give you the best print with minimal supports, I have aslo incl...
2022-10-02 12:18:09 +0000 UTC View Post
Here is the new link for the October Patrons.
.
.
.
.
https://www.dropbox.com/sh/0fte3nqddl9z4h4/AABNJBqCMykQA7ukwPXgrsoua?dl=0
2022-10-02 11:08:52 +0000 UTC View Post
Well 145 of you have spoken and you have chosen 4 solid picks to be modelled and released in October.
In no particular order:
Mega Charizard X
Mega Blastoise
Mega Gengar
Mega Houndoom
I know I'm personally looking forward to modelling these and of course seeing what everyone does with them!
Aside from the poll picks there will be other models released on October 2 including Zombie Charmander, Stitched Squirtle, and a Squirtle Skull that you can see in the imag...
2022-09-29 19:00:35 +0000 UTC View PostFor the October poll I decided to do something a little different and went with all ten choices as MEGA evolutions! Definitely going to have some tough decisions but some good models in the end no matter what. You have until September 28th at 5pm EST to make your pick so get to it before it's too late.
Also remember, top 4 get modelled!
The last Poll Pick for this month, Haunter, is available to everyone now. You can find the files in the September folder as well as the larger Pokemon folder.
Supports will be needed a little more than usual compared to previous files, but it mainly needs them on the top teeth and the sides of the hands. Everything else should be good to go unless you really scale it up.
It has been a VERY busy month for releases (about 15 new files!) so this will be the last one until October. Sp...
2022-09-24 12:35:19 +0000 UTC View Post
Ornamental 3 out of 4 for this month, Flareon, is now in the Dropbox waiting for you. You can find the files in the September folder or the folder with all of the previous Ornamentals.
Supports for this one should be pretty minimal but under the torso is where you might want to look at first.
Haunter is the last one for this month and will be out soon!
2022-09-21 22:41:53 +0000 UTC View Post
So I woke up this morning to notifications that a few more patrons had subscribed and because of that, this Patreon has hit 300 total. To be honest, I hoped it would eventually get to that number but it's pretty mind boggling to think it's there now.
I want to say thank you to everyone that has ever joined and helped push me and the Patreon to where it is now. The very few of you that have been here since January and are still here, those that have come and gone, and all of those that h...
2022-09-19 11:21:08 +0000 UTC View Post
I have added an addition to the Wall Mounted Gastly evolution line folder - Mega Gengar! There is the version with the mounting holes and without as well as a version with the arms split from the body so you can make it a little bigger.
Supports for this one are very minimal if any, but you know your machines best so do what feels right.
You can find the files in the September folder and the Wall Mounted folder.
Have a good day!
2022-09-17 15:38:22 +0000 UTC View Post
To go along with the Ornamental and Basic versions of Mimikyu, you now have an easy to print Zombie version as well. You shouldn't need any supports for this one so have fun!
Files are available in the September folder and the Halloween folder.
2022-09-17 12:55:18 +0000 UTC View Post
Happy Friday everyone!
There are some new models waiting for you in the Dropbox, 2 different versions of both Ornamental and Basic. The straight up head version will be easier for the FDM printers since you wont need supports for the... ears? If you want to print the head tilt version you will need supports under the one side of the head as well as the ear.
The files are in the September folder as well as the Pokemon (Ornamental and Basic) folder.
Thanks for the continued su...
2022-09-16 20:45:31 +0000 UTC View Post
Another one! Admittedly I may be getting a little carried away with the zombie stuff but it's been fun to switch it up a little and do something different.
Just like the regular Snorlax model, this one can be done without supports so it's a nice easy print.
the file is in the September folder as well as the Halloween folder.
Mimikyu is in progress and will be the next Ornamental/Basic model being released so stay tuned for that!
Have a great Friday and happ...
2022-09-09 13:47:51 +0000 UTC View Post
So I got carried away with Gengar and then that turned into getting into Gastly and Haunter which turned into these wall mounted versions of all 3! They all have versions with a completely flat back and versions with holes so that they can be hung on screws, whichever you prefer.
Gastly should be good to run without supports, Haunter might need a little under the top point on it's head, and Gengar may need some under it's arm. All dependant on your machines but that's where I will...
2022-09-08 20:29:21 +0000 UTC View Post
Hey Everyone!
I've got another one for you today and a gnarly Zombie Gengar! This should be another pretty straight forward print and should only need supports under the arms.
We're at over 5 models so far this month and it's only the 6th!
Zombie Gengar is in the Halloween folder in the Dropbox so have fun.
2022-09-06 19:39:54 +0000 UTC View Post
Well it's been a busy weekend to say the least! Another model is ready for you and waiting and it's Gengar. This wont be the only Gengar you find this month but you'll have to wait and see what the others will be...
You will need supports on this one but I have tried to make them as minimal as possible. Mostly under the arms right in the pits and under some of the ornamental designs. The files are in the "Pokemon (Ornamental and Basic)" Folder and there is the Basic version as well.
... 2022-09-05 18:17:37 +0000 UTC View Post
So I lied. in the last post I said you would be getting the first Ornamental as your next model and instead I finished up Pumpkaboo! You have a few versions available to you, a full solid version, a hollowed out version, and a hollowed out version that has the top split like you would do with a regular pumpkin (open eyes and closed eyes).
It should go without saying, don't put a lit candle in this but I'll mention it anyways just to be safe lol.
In the Dropbox folder t...
2022-09-04 17:37:34 +0000 UTC View Post
Zombie Charizard is now in the Dropbox waiting for you to print! There are a few versions in the folder for you and they are:
- The full version with no cuts, perfect for the resin printers.
- A split version where the spine meets the head for those of you that want to go bigger.
- A split-head version that has some small flat spots at the back of the neck and the tips of the horns so when printing on FDM, there are solid contact points to the build plate.
Since I test print...
2022-09-03 13:51:39 +0000 UTC View Post
Just a quick post to let you know that the Monster Pikachu files are available now in the new Dropbox link. There is a folder marked "Halloween" that you will find this and the rest of the Halloween files that will be released.
Happy Printing!
2022-09-02 10:53:46 +0000 UTC View Post
Here is the link for September.
.
.
.
.
.
https://www.dropbox.com/sh/ncxkin6n72klzv6/AACYYNxtnMP14qUeRjwI0zqga?dl=0
2022-09-02 10:50:33 +0000 UTC View Post
Well I would first like to thank everyone for coming back for another month, your support means the world to me and isn't taken lightly. We have a big month of models coming so hold on to your hats and order some material!
Starting tomorrow I will be releasing the Monster Pikachu model you can see in the pictures above. Pikachu is the beginning of the Halloween models that will be coming out before the big day but I wanted to make sure everyone had plenty of time to print for all ...
2022-09-01 14:49:26 +0000 UTC View PostHere is the poll for what is up for grabs for the September models. There is a majority or Ghost/Dark types to get us in the mood for Halloween. Also, it's the top 4 that get modelled so pick strategically if you're struggling to decide, you may get both! You have until August 31, 5pm EST to get your vote in but don't wait too long!
2022-08-29 14:00:21 +0000 UTC View Post
Well you have a handful of Venusaur models ready for you in the Dropbox. There is the Ornamental and Basic versions, both with a full version and a split version that should make it easier for the FDM prints. On top of that you have a planter version of both the Ornamental and Basic styles.
When it comes to supports you will need some under the chin for sure and if you are going for the split version, I would add some supports along the sides of the flower petals just to get a cle...
2022-08-24 18:38:42 +0000 UTC View Post
Don't worry, the other Eeveelutions are still coming! I just wanted to model something easy this morning and was able to get this done pretty quickly. You shouldn't need any supports so just slice it and have fun!
Have a good weekend!
2022-08-20 13:50:51 +0000 UTC View Post
Well just in time for the weekend you have both Ornamental and Basic versions of Totodile! I have done a top teeth removed version and a complete version for both Ornamental and Basic so you can print these without supports on FDM if you want.
Venusaur is last up for this month's poll picks and I plan on doing a planter version of the model as well for those of you with a green thumb.
Have a good weekend everyone!
2022-08-19 19:25:42 +0000 UTC View Post
Just a quick post to let you know that the Basic version of the Articulating Gyarados is available now in the Dropbox. Available in a curved version and straight just like the ornamental.
Have fun!
Both the Ornamental version and the Basic version of Gyarados are ready for you and waiting in the Dropbox. I have included a version with the head removed from the body if you wanted to print it in 2 pieces so you don't have supports running as tall as the model. I still have the Basic version of the Articulating print coming as well as the other 2 poll picks for this month.
Don't forget to join the Discord channel if you haven't already, we are seeing some great prints being show...
Happy Monday Everyone!
Thank you for being patient on the next set of models, Covid finally caught up with me and took me out of the game for a few days but aside from a lingering cough, I'm all good again.
I tried modelling Gyarados in a way that gives me the fastest way to do multiple models and I think it's worked they way I wanted. Right now I have the Ornamental Articulating Gyarados ready for you with the Basic version coming soon now that I know everything wiggles as it sho...
2022-08-15 15:26:48 +0000 UTC View Post
Happy Saturday everyone! This month's first model from the poll picks, Ninetales, has been uploaded to the Dropbox and is ready for you to download and print. This one is a pretty easy print and should only need supports under the belly for the ornamental designs.
Gyarados will be up next!
2022-08-06 20:44:51 +0000 UTC View Post