Batman baton functionality test
Added 2022-05-03 09:32:04 +0000 UTCHere it is, all parts printed, and tested, and it works just as intendeed.
The middle screw mechanism works great, so does the screws on the side
One thing i have forgot to mention is - the left baton "body 1 and 2" screw clockwise, while on the right one they screw counter clockwise - i've added a photo for that to the folder as well :)
I used 4 rubberbands for the inside and that seems to be the perfect tension to bring the chain back into the handles.
The chain is printed in place, inspired by a designed called "sal" on thingi - however i wanted a chain thats a bit less low poly, with i higher success rate, so i designed my own - oyu can print the chain in place and just break it loose :)
Comments
no supports needed on any part :)
Marko Makaj
2022-05-12 22:18:23 +0000 UTCyup, same here, i didnt use any supports on any part :) thank you :)
Marko Makaj
2022-05-12 22:18:10 +0000 UTCPrinted it standing up, no issues with support, great model.
midnightrambler
2022-05-12 19:01:20 +0000 UTCI just joined and this thing is awesome! About to print on heavily modified Ender 3. I am assuming this needs supports when printed standing up?
Keith Barrette
2022-05-12 15:24:57 +0000 UTC
