Tiny Stingrays! - and Rock Stand!
Added 2023-07-28 23:47:42 +0000 UTCThis was a JULY Design and has been Archived! If you were subscribed in July you will receive an email from MyMiniFactory within the week to access the archived files from that month. If you are starting your Subscription in August, Welcome! Your exclusive models are available immediately in the Exclusive posts (link below) and the August Models will be in the August posts tab as they come out over the month! https://www.patreon.com/cinderwing3d?filters[tag]=Exclusives
If you missed this model or any others they are available on MMF for purchase! Please use the Discount code: CinderAug23
https://www.myminifactory.com/users/Cinderwing3D?show=store
------------------------------------------------------
Hi Cinders!
Last July Release!! The Tiny Stingray! I've wanted to make this for a while and the hinges were a bit tricky - but got it! I designed it to be strong! - Even the tail has reinforced vertical links so that it doesn't break easily! It also has great articulation from 100% -60%!
ALSO included a Rock Stand! Thought it would be cute to have them look like they were swimming together so I made one that could hold 2!
Hope you all enjoy these!! I'll be taking a break for a few days and have some exciting models planned for August! :) Thank you for your support this month!
- Tracy
------------------------------------------------------
July Models:
- Tiny Crystal Dragon & Long Tail Version - RELEASED
- Lunarwing SUPPORTER EXCLUSIVE - RELEASED
- BONUS .3mfs Community Mods - RELEASED
- Apple Turtles - RELEASED
- Autumn Dragon - RELEASED
- Autumnwing Dragon - RELEASED
- Tiny Stingray and Rock Stand- RELEASED
-------------------------------------------------------
PLEASE READ
Please see WELCOME POST for questions, all exclusive releases, and links: https://www.patreon.com/posts/welcome-to-info-71819754
Discord is our MAIN form of communication and way to provide help! Please join our community below: Discord chat HERE: https://discord.gg/cinderwing3d
For any help requests or issues please go through this email: Email (contactcinderwing3d@gmail.com) OR through a Discord ticket!
Thank you, Cinders, for your support!!! And Thank you to our Admin Jazzy and Test Team for all your hard work!
Comments
Where can i find the stl file for the baby stingrays
Joe Brewer
2024-04-24 22:09:09 +0000 UTCAnd your bed adheasion. I printed mine on 3 different printers without any issues. I got the time down on my CR-10s to just over 2 hours a print. Not once did the parts stick together.
Gerhard Grobler
2023-09-12 00:01:18 +0000 UTCI'd recommend checking your tolerances and cooling!
Jazzy
2023-08-19 15:16:57 +0000 UTCGenerally any acrylics will be fine
Jazzy
2023-08-19 15:16:40 +0000 UTCDo you a suggestion for the best paint for models? One that's not too runny?
Logan Hohm
2023-08-17 12:52:06 +0000 UTCI have printed this twice and the back of it's left fin keeps attaching to the body. Advice please?
Cierra Garrison
2023-08-09 23:19:14 +0000 UTCOk that was my guess but i just wanted to be sure. Thank you!
andrew monk
2023-08-06 19:37:50 +0000 UTCThere is no paint job for this model. Tracy painted the spots on with actual paint!
Jazzy
2023-08-06 18:38:47 +0000 UTCi downloaded the file from MMF since ive been away from home for a bit and there are no spots on the file (even one solid color showing where the spots are). was this a custom paint job after printing or was there a spotted and non spotted file and I'm just missing one?
andrew monk
2023-08-06 08:35:59 +0000 UTCIf you are missing month or files please send an email to contactcinderwing3d@gmail.com or file a ticket on Discord. We cannot provide support via Patreon messages or comments.
Jazzy
2023-08-04 23:42:56 +0000 UTCi got the email about this and the rock last month but no files for these
Tina Erb
2023-08-04 21:52:44 +0000 UTCHey! Most models are tested and are intended for 60-100% Anything outside of that is untested and you may have to adjust for anything outside those ranges.
Jazzy
2023-08-01 00:50:48 +0000 UTCThe stand scaled up is very loose and the stingray keeps falling out. So if I scale up the stingray to 125 and the stand to 125 it just flops out as there is too much room where the tail goes.
Herb Veitenhans
2023-07-31 23:36:42 +0000 UTCnever mind i see it duh
Tish Cunningham
2023-07-30 20:20:02 +0000 UTCwhere do i get the tiny stingray file
Tish Cunningham
2023-07-30 20:18:21 +0000 UTCI've tried a few Ziro filaments too. I've got the transparent seasons, rainbow, wood, matcha and camouflage samplers. I like them!
Gregory A Henry
2023-07-30 01:22:38 +0000 UTCThey are Ziro brand filaments but not sure of the colors
Jazzy
2023-07-29 18:31:13 +0000 UTCWow amazingly cute
Seth Shingleton
2023-07-29 12:17:00 +0000 UTCFilaments please!
Gregory A Henry
2023-07-29 05:40:21 +0000 UTCThese are so adorable!
Joanna Wieclaw
2023-07-29 04:12:51 +0000 UTCThank you! yes, just the back end of a paintbrush and acrylic paint! :)
Tracy Francis
2023-07-29 03:19:51 +0000 UTCLove it. As I scrolled down my feed, to my surprise here are super cute stingrays! And I have just the filament to use for them. CRON Kingfisher
Gerhard Grobler
2023-07-29 02:44:43 +0000 UTCThis is great! If the whole next month was just cute sea creatures i wouldn't be mad at all :D
Iron Platypus
2023-07-29 02:12:57 +0000 UTCThese were painted with acylics!
Jazzy
2023-07-29 01:45:39 +0000 UTCSo cute! Starting 4 now!
Laura Thayer
2023-07-29 01:14:20 +0000 UTCThese are great!!
Natalie Ashton
2023-07-29 00:48:23 +0000 UTCStarting a plate full right now
Trishia Rodriguez
2023-07-29 00:45:31 +0000 UTCNailed it!
SneakySmurf
2023-07-29 00:38:38 +0000 UTCMost likely a mmu printer (like the bamboo printer)
R. Clinton
2023-07-29 00:24:39 +0000 UTCThese are awesome
Nicholas Ell
2023-07-29 00:06:47 +0000 UTCLooks awesome!
Gregory A Henry
2023-07-29 00:03:41 +0000 UTCWhat do you use for the dots? They are so well done!
BoozingPanda
2023-07-29 00:00:46 +0000 UTCOmg their own rock 🪨🥺
MB Prints
2023-07-28 23:49:28 +0000 UTCI love it and the stand was a great addition. Thanks for another great model.
sNp
2023-07-28 23:49:11 +0000 UTCGreat timing, these will be fantastic at a reptile expo in Corpus Christi in a few weeks!
Travis Gilbert
2023-07-28 23:49:00 +0000 UTC
