Multiverse Monday #110: Gymlaf the Greige
Added 2021-01-04 15:01:01 +0000 UTCIt's Gymlaf the Greige! (grey + beige = greige) This wandering wizlock of no small repute is part of the mythology we're building for our Coils of Chaos RPG setting. Model prints without support, as per the usual. Have a terrific Monday, folks.
Comments
Yeah, we're not getting a defect in our prints, but if you are, I uploaded a version just now that should fix that, and it doesn't change the overall look of the model.
Ill Gotten Games
2021-01-07 21:54:13 +0000 UTCThe object that is printed alongside is a neat tool to allow each layer to cool down enough before the next layer. But for the slicer it also conceals the issue, that there are empty layers at the tip of Gymlaf's rod. Try to slice him without that object and the slicer will show you a warning. Yes it prints overall - but if you have a look at the tip of your print you see the defect.
2021-01-06 19:46:36 +0000 UTCWe printed with stock settings and the standard .4 that comes with the machine: https://www.instagram.com/p/CJqtspAn2fM/?igshid=1cnq3o1d6tep2 Those renders in the slicing program can often be misleading. Seen that plenty of times.
Ill Gotten Games
2021-01-05 14:58:44 +0000 UTCIt would be printable with a 0.25 nozzle. This is what I get with my standard 0.4 https://imgur.com/auoPDcZ
2021-01-05 08:33:19 +0000 UTCWe got to the lab and threw him on one of our Prusas. Seems to be printing fine here. Are you sure it won't print?
Ill Gotten Games
2021-01-05 01:40:20 +0000 UTCPrusaslicer, 30mm. I tried it at 116,66% (35mm),too, but it made no difference.
2021-01-04 18:25:31 +0000 UTCThanks! Which scale and which slicer?
Ill Gotten Games
2021-01-04 17:41:50 +0000 UTC
