Hi and welcome here:
Added 2023-04-26 01:29:28 +0000 UTCFirst of all thank you for your support, without it most of these project would remain in their infancy and limited to my printer setup, some project would not even exist.
The shop page has the latest version.of the Apollo and other projects (feel free to request STEP files if not present)
https://www.patreon.com/squirrelf3d/shop
Apollo Lander 2024: https://www.patreon.com/squirrelf3d/shop/apollolander-reorganized-78313
ApolloLander 2025 (not all hotend are updated yet), minor tweaks: https://www.patreon.com/squirrelf3d/shop/apollolander-2025-762128
Follow me on Printables: https://www.printables.com/@squirrelf3d
Follow me on Instagram: https://www.instagram.com/squirrelf3d/
Also join the DISCORD server where a lot happens and I can help you and you'll find a nice little community. I wrote a little how to here: https://www.patreon.com/posts/how-to-connect-98492026
Comments
Apollo on Ender 3 pro / Linear Rails / Mosquito (normal) / BLTouch / Orbiter V2. Some remarks: The fan ducts (i tryed all the types) => +- 2mm too low. I adjusted this by adjusting the mosquito mounting plate by 2mm thickness. BLTouch: only left position. On this position the BLTouch bounces on the left of the printer. Adjusted this by mirror the BLtouch holder and copy the whole to the other side of the main base. Alternative: use the front mount. Hope this help for some improvements of the Apollo prototype.
Jean Toussaint
2023-08-22 13:08:05 +0000 UTCThe Apollo has a 4020 front fan (and of course a 4010 would fit as well), if that's what you meant. The 5015 (apollo) and 4010 (apollo mini) refer to the side fans (part cooling) Bltouch mounts on the left side with a couple screws (one short one going into the main body directly, part that holes the fans), and second screw is shared with the left side fan screw, which then also goes into the main body
Squirrelf
2023-08-21 17:33:30 +0000 UTCyes of course! would be easier through discord if you can join up (through your user settings page I believe )
Squirrelf
2023-08-21 17:30:08 +0000 UTCJean Toussaint
2023-08-21 17:21:05 +0000 UTCJean Toussaint
2023-08-21 17:20:45 +0000 UTCHello, the Apollo looks great. I'm going for a Mosquito Hotend with an Orbiter V2. 2 x 5015 fans. 1 x 4020 fan This mounted on a Ender 3 pro with Z-Linear Rail (top mounted). I have the Liniear conversion kit from Unitak. https://www.amazon.com.be/-/nl/UniTak3D-upgrade-gespreksondersteuning-lineaire-inbegrepen/dp/B09M73XRBH/ref=asc_df_B09M73XRBH/?tag=begogshpadd0d-21&linkCode=df0&hvadid=632995438762&hvpos=&hvnetw=g&hvrand=3833388258969204618&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1001208&hvtargid=pla-1629423313154&gclid=CjwKCAjwloynBhBbEiwAGY25dAhhDzBW1XeuXSN4w37gNfqoKPpM2w11BvVgmBPzzO5PGBfBLAt00xoCGu8QAvD_BwE&th=1
Jean Toussaint
2023-08-21 17:18:39 +0000 UTCit's now in the APOLLO_STEP_2023_07_05.zip with a few more things
Squirrelf
2023-08-05 17:29:26 +0000 UTCsorry it took so long, I added a step file called "v6_orbiter_2_rails.step" in the list of file of this post, at the bottom of the page. I will later remove it and include it in the STEP zip. And I'll later make a better STEP file with more stuff in it.
Squirrelf
2023-08-04 05:13:53 +0000 UTCMy hotend is E3D V6 and Extruder is orbiter 2.0.
유클리드
2023-08-02 18:29:52 +0000 UTCSounds good! What hotend and what extruder setup?
Squirrelf
2023-08-02 15:23:13 +0000 UTCi need to Step file of 'APOLLO_X_rain_MGN12H_CREALITY_E3D_OTHERS_HOTENDS_2023_07_02'. Because i'm using MGN9H Rail. i will modify your file. thank you!
유클리드
2023-08-01 12:25:41 +0000 UTC
