HOW TO MAKE YOUR OWN BUNNY EARS!
Added 2022-04-22 23:18:26 +0000 UTCWant to make your own Easter Bunny Ears? It's easy! Check out this tiktok of how to do it and follow these steps below.
Cut an outline of your ears out of thick paper, like construction paper.
Draw an outline of your cutout on 6mm EVA Foam
Carefully cut out this outline with a box cutter or Exacto knife
I DIDNT FILM THIS PART BC I A DING DONG
In a well ventilated area, use contact cement to glue together the tip of your ears.
Cut out the inner fabric you wish to use on your ears!
Slowly trim the fabric until it fits in the inner area of your bunny ear.
Hot Glue that baby! Hot Glue is your BFF.
Don't worry about any wrinkles or mess ups, your outer fabric will cover it!
Now cut your outer fabric into a smaller, more easy to work with shape.
Slowly fold over and glue your outer fabric to the edges of your bunny ear.
IF YOU DON'T WANT A FLOPPY EAR, JUST REPEAT THE STEPS FOR A SECOND EAR!
For floppy ear, take a heat gun to your second outline cutout until you feel it soften.
Fold your ear to whatever bend looks good to you and hold it in place for about a minute.
Repeat the same steps with your fabric!
You must do the flop first before gluing on fabric because the heat gun will singe your fur and melt your hot glue!
Then take your BFF, hot glue, and a small strip of your outer fabric. Glue the outer fabric around the headband!
I try to cover it all the way, but if you have some of the headband showing underneath, that's ok! No one will see it.
Cut any fuzzy fabric at the bottom of your ears and on where you want your ears to sit on the headband.
Use Hot Glue or the same Contact Cement to glue your bunny ears into place and BOOM! YOURE DONE! WOW! I hope you enjoyed!
