Well, this is definitely not the update I thought I would be sharing today but life is unpredictable sometimes. If you did not catch the last live stream or see any of the previous posts, we had some pretty serious water damage to the condo we have been renting. I was taking a work break last Tuesday when I suddenly heard loud water sounds. I walked down the hall to find a pretty good crack in the kitchen ceiling with water pouring out of it. Turns out the upstairs unit had a small leak that ...
2022-05-28 17:39:40 +0000 UTC
View Post
I wanted to take a moment to wish everyone a Happy New Years :). This has been an absolutely crazy year and I am incredibly thankful for each and everyone of you being by my side and allowing me to continue on this journey.
Some highlights:
The channel had its biggest growth this past year with roughly 29,000 new faces.
We launched the ModBotArmy Discord sometime around march and there are now over 700 members which is insane. I have loved hanging out, answering ...
2022-01-02 00:12:24 +0000 UTC
View Post
Hello everyone!
Was looking at realized it has been a bit over a month since last post and wanted to check in. Livestreams have officially started over on the ModBotArmy channel:
https://www.youtube.com/channel/UCV45SpVUTgDgsqgMboeTRpA
Yesterday was our second stream and tomorrow we will be unboxing an LDO Voron 0.1 kit on stream to get ready for our build which will begin ...
2021-10-29 05:48:47 +0000 UTC
View Post
Well, it has officially been a month since I have been creating content full time and wow has it been a busy one. I spent many hours working on the Voron 0.1 build which will be going live this Saturday. I am very happy with the end result but am already planning on reprinting and rebuilding quite a few parts to get better quality and I feel that interlayer adhesion could be improved on a few parts as well. (3d printing haha)
If you are not active in the discord you may have missed that...
2021-09-22 20:26:41 +0000 UTC
View Post
Hello Everyone!
There have been some big changes in my personal life that I wanted to update you all with. As of today, August 23rd, I am officially a full-time self employed Content Creator. This is something that has been on the horizon to an extent for some time now, but I did not think it would happen quite yet. A new policy was put in place at my day job that conflicted with my ability to create content online and on my channel. So I was ultimately tasked with a choice of eit...
2021-08-23 21:38:17 +0000 UTC
View Post
With this last video that went live yesterday we have uploaded a video every single Saturday for the entire year. Since the inception of my channel I have never had such a consistent schedule. Even when I was shooting for a video a week it was very random and did not last long. I am incredibly proud of sticking to this schedule and want to thank all of you for your continued support. On the days or weeks that I felt like slacking off all I had to do was look at the kind messages and comments ...
2020-12-28 04:34:42 +0000 UTC
View Post
Hello amazing people.
I have been so bad on posting on here so I wanted to say hello and that I appreciate all of you for supporting my channel and my projects(both new and existing Patreons of course). I hope that everyone has been doing well in these difficult times. There has been a ton going on in my lab (living room). For the channel, we have some product showcases/reviews coming up in the next few weeks. I will also be doing another "how to print with" video and a couple of ...
2020-11-28 23:21:16 +0000 UTC
View Post
Hello amazing people!
I want to do my best to at least do a once a month post on Patreon for all of you and was curious as to what you would be interested in seeing. Perhaps updates on what is upcoming? Additional info I could not fit into a video? Please let me know what you are interested as I want to make sure I am providing as much value as I can to you guys :)
Looking forward to some feedback.
Have a great weekend!
2020-08-30 07:32:39 +0000 UTC
View Post
Huge thank you to all of my patrons! I have some videos coming up that I am very excited about. Tomorrow will be a 4in1 printer review and next week will be on a board upgrade for the Creality Ender 3! Also, if you missed this weeks Makers Minute Podcast, it is officially live on all major podcast platforms.
Have an amazing week :)
2020-02-15 03:45:50 +0000 UTC
View Post
Hope everyone had an awesome week! I am working on a pretty sweet project involving a Nintendo Switch and resin printing which I am excited to show off. Definitely feels more like the kind of videos I used to do when I first got into YouTube. Next weeks video will be a comparison between some TPU I have had for years versus it being dried out. Should be fun to see the differences and how moisture has affected the filament over such an extent of time.
As always, thank you all for being a...
2019-09-14 21:00:39 +0000 UTC
View Post
Hey guys!
I am currently editing out next weeks video and figured I would give you a spoiler. Next weeks video is going to be a review on the Artillery Sidewinder X1 3D Printer. This is my favorite new printer that has come out this year and I am stoked to share my experience with you all. I hope you are all having an amazing week and thank you for being awesome :D
Daniel
2019-08-27 01:47:54 +0000 UTC
View Post
Hey guys! I did announce this briefly on Twitter but I officially moved into a bigger place and will have a complete room for 3D printing and all things making. I have a huge list of videos and projects already lined up. Starting next weekend, I will be working on dialing the room in to also get it set up for semi regular live streams. I am crazy excited. I have a few upcoming printer reviews as well as some projects that I am looking forward to sharing with you guys.
2019-07-21 05:12:52 +0000 UTC
View Post
Just wanted to say thank you to all of my Patreons that have been supporting my projects and channel. You guys rock :D
2018-06-18 06:51:20 +0000 UTC
View Post
I had planned on making a video on it but have not even gotten a chance from how busy I have been! I am officially back in school! I am taking a summer class meaning it is only 6 weeks versus the standard 16 weeks at my school. Its Trig, and needless to say it has been alot. Class is every day for 3 hours and homework is taking another 4-5 hours so I have been pretty mentally drained after. I will still have some videos coming out I just will not have quite so many until this 6 week semester is ...
2017-06-27 22:56:35 +0000 UTC
View Post
Video is dropping tomorrow :) Happy wednesday!
2017-03-16 06:10:45 +0000 UTC
View Post
Happy Monday :)
2017-03-14 04:57:42 +0000 UTC
View Post
Tomorrows video will show how to properly level the z screws to make sure your x axis is straight. As well as leveling your bed.
2017-03-11 05:42:00 +0000 UTC
View Post
Thank you so much for the support this month!
2016-07-31 23:59:00 +0000 UTC
View Post
Thank you so much for the support this month!
2016-06-30 23:59:00 +0000 UTC
View Post
Thank you so much for the support this month!
2016-05-31 23:59:00 +0000 UTC
View Post
Well I'm taking a dive into cad software hoping to get the hang and enough practice to be able to make some awesome designs and prints :) Hope everyone is having a good week!
2016-05-17 05:58:01 +0000 UTC
View Post
Thank you so much for the support this month!
2016-04-30 23:59:00 +0000 UTC
View Post
I received my raspberry pi 3 in the mail today and attempted to follow tutorials that where out there with some trouble so I recorded my own tutorial as none of the tutorials where for the newest member to the pi family. Hoping that in combination of this and the other great info out there you will be able to setup octoprint for your 3d printer in as few steps as possible!
2016-04-08 08:55:04 +0000 UTC
View Post
Just finished recording and editing a video showing how to install an LCD with sd support to your 3d printer running marlin firmware! Will be live shortly!
2016-04-06 09:38:02 +0000 UTC
View Post
Thank you so much for the support this month!
2016-03-31 06:59:00 +0000 UTC
View Post
Just finished adding an lcd to my 3d printer and printing a case/mount for it looks awesome
2016-03-30 02:24:43 +0000 UTC
View Post
Rendering out review of my experience with building this 3d printer via there kit! Will be live in about an hour!
2016-03-29 06:01:38 +0000 UTC
View Post
Just added some leds to my fulgertech Prusa i3 they turned out great!
2016-03-26 08:23:24 +0000 UTC
View Post
Mod chip wiki rendering and going live tonight
2016-03-10 07:23:26 +0000 UTC
View Post
Printing a 3d printer as of right now! Video with more info and updates on it will be coming soon :)
2016-03-08 14:32:38 +0000 UTC
View Post
