* Improved stability of CTR HYBRID OC.
* Holding time for P1 profile is halved by default. I believe that the current settings will make HYBRID OC more responsive. In any case you can configure everything yourself.
* Fixed 550MHz profile sticking.
* Profile status can now more accurately describe the problem when applying values (if there is one).
* The maximum value for FIT Scalar is 1000. Be careful(!).
* Slightly reduced penalties for creating a profile. In some(...
* Customization for P0 profile! PBO, FIT Scalar, Boost Override and Tj.
* More user-friendly interface.
* More pop-up tips.
* Added individual holding for P1 and P2.
* Information about the current status of the PBO (PROFILE MANAGEMENT tab).
* If there are no CPPC tags in the system, CTR does not want to work. Fixed.
VIRUSTOTAL report:
I want to move the "CCX usage" , "Holding time" and "CPU usage" settings to the profile page. It will be more convenient (and more understandable for newbies). It will take me a few hours.
;)
Advanced mode for CTR HYBRID OC - customize BOOST to your liking.
The build will be available for early access tomorrow morning.
2021-01-30 19:51:17 +0000 UTC View Post* Fixed frequency or voltage "latching" in different modes (rare bug).
* Fixed bug when CTR did not want to do tuning if voltage is higher than 1.35V.
* Improved LLC tips.
* Changed starting voltages for diagnostics ( Zen 3. Only for situations when very bad sample).
* Improved Phoenix stability for diagnostic mode.
The LLC recommendations are informational in nature. It is not worth raising a hype. If you can not adjust the LLC - do not worry, just do not use a voltage higher than 1.35V.
2021-01-26 21:04:08 +0000 UTC View PostChangelog:
* "TEMP.ini not found or file corrupted" completely fixed. The temporary values are saved in two files.
* Improved support for low write speed SDDs or "dirty" OS. Avoids situations where logs or settings were corrupted due to a computer reboot.
* "LibreHardwareMonitorLib" is removed from CTR. The monitoring response speed has increased up to 3 times. Response time during idle time is about 600µs, during 100% load it is 2000µs.
* The limit for the maxim...
2021-01-26 11:21:22 +0000 UTC View PostHey!
What's up, guys?
I've already started preparing an article on CTR 2.0. It will contain explanations and examples. It will be released on February 1, together with the release of CTR 2.0.
Just a reminder that all early access subscribers will get exclusive access to the very first build of CTR 2.1 on January 31st. I have something that will surprise you :)
2021-01-23 14:28:28 +0000 UTC View Post* "TEMP.ini not found or file corrupted" completely fixed. The temporary values are saved in two files.
* Improved support for low write speed SDDs or "dirty" OS. Avoids situations where logs or settings were corrupted due to a computer reboot.
* "LibreHardwareMonitorLib" is removed from CTR. The monitoring response speed has increased up to 3 times. Response time during idle time is about 600µs, during 100% load it is 2000µs.
* The limit for the maximum ...
2021-01-19 11:28:37 +0000 UTC View PostCTR 2.0 RC3 will be available to the public on January 30-31. I may have time to prepare the accompanying material a little earlier. It all depends on AGESA. I really hope that by now AGESA 1.2.0.0 will be available for most users.
===================================================================
CTR 2.1 beta 1 will also be available for early access subscribers on January 30-31. Key features are Fmax adjustment, FIT Scalar and PBO.
P.s. I am very gra...
* CTR now uses MP1 instead of RSMU to communicate with the processor. Perhaps this will improve compatibility for some systems.
* Added notification of WHEA error count. This will help user to find false core errors during diagnostic or tuning.
* IFSO 2.0 now works correctly for 3900X, 3900 and 3950X.
* Fixed bug of stopping diagnostic process after FIT measurement (for 3900X, 3900 and 3950X).
* A number of improvements to correctly detect CPPC ...
2021-01-15 13:51:31 +0000 UTC View Post* Instant system reboot when HYBRID OC is activated and only P1 profile exists. Fixed.
* "TEMP.ini file is empty or corrupted". Fixed.
* Application (not system) crashes while running diagnostics. Fixed.
Some of you may have encountered the error "TEMP.ini file is empty or corrupted".
I'm publishing a test fix.
2021-01-09 11:00:33 +0000 UTC View Post* Added global mutex for PCI bus (improves CTR command protection, provides full compatibility with other monitoring software).
* Added support for processors that only have active CCD#2 (now CTR does not require a BIOS update).
* Added 3 individual stats tables for 5950X + 5900X , 5800X and 5600X.
* Settings values for hybrid OC are not saved . Fixed.
* Improved protection for logging and temporary files (increased CTR fault tolerance).<...
2021-01-08 19:46:32 +0000 UTC View PostHey guys!
I've decided not to release an intermediate beta 3 version (new build), but instead to release a full-fledged release candidate (RC1). I think the world won't go crazy in a few days and these few days will allow me to properly test the product.
There are a lot of changes. First and foremost, improved security. Secondly support for processors, that want a "new BIOS" (an alternative way found). And many more :)
I am aware of the fact that some users consider "piracy" a normal phenomenon. And it's disgusting. I also often encounter archives which are infected with viruses. I don't recommend downloading the program from sources I haven't mentioned anywhere. At the moment Patreon is the only source.
About the good news. Tomorrow a new build will be published. It containscontains some new features and a number of improvements.
P.s. Thank you for your interest and your help, this is the only...
What's new?
* Fixed error when switching P1/P2 profiles
* Profile activation sensitivity doubled (allows you to activate the desired profile faster)
* Additional security for writing temp data (allows Phoenix to work correctly)
* Fix for rare bug when Phoenix doesn't want to do anything
* Fixed bug of manual profiles activation when load (cpu usage 100%) is already present in the system
* Added notification if BIOS is incompatible
* Added ability to save "Settings mode...
* Fixed error when switching P1/P2 profiles
* Profile activation sensitivity doubled (allows you to activate the desired profile faster)
* Additional security for writing temp data (allows Phoenix to work correctly)
* Fix for rare bug when Phoenix doesn't want to do anything
* Fixed bug of manual profiles activation when load (cpu usage 100%) is already present in the system
* Added notification if BIOS is incompatible
* Added ability to save "Settings mode" state
...
If you own an MSI motherboard and you don't get frequency or temperature readings it means that the BIOS has errors. You need to wait for BIOS update.
After the holidays I will definitely contact MSI to solve this problem.
BR, Yuri
FIXES:
* CTR crashes if PPT/TDC/EDC fields are empty
* Program configuration file breaks after BSOD/Reboot (no way to start the program manually)
* "Phoenix" infinite loop
* IFSO 2.0 causes an instant crash
IMPROVEMENTS:
* Calibration for Zen 3 category (Platinum, Gold, Silver, Bronze)
* CTR settings and temporary values are now stored in different files (allows to improve program fa...
2020-12-30 17:00:03 +0000 UTC View PostThank you for supporting me and writing feedback!
FIXES:
* CTR crashes if PPT/TDC/EDC fields are empty
* Program configuration file breaks after BSOD/Reboot (no way to start the program manually)
* "Phoenix" infinite loop
* Category calibration for Zen 3 processors (Platinum, Gold, Silver, Bronze)
* IFSO 2.0 causes an instant crash
* CTR settings and temporary values are now stored in different files (allows to improve program fault toleran...
2020-12-29 16:32:31 +0000 UTC View PostVirustotal info >> https://www.virustotal.com/gui/file/b1b3aed76dfd9f84f7320a4d6d8275ea4ffad4f226d4c53ba0f62e4235b037fb/detection
2020-12-28 21:15:02 +0000 UTC View Post
I know you faced difficulties earlier, but you gave the project a chance to become better. Thank you. I hope this little review of key features can please you.
P.s. The presentation will be available to news outlets in a few days.
- Yuri
Health and success to you and your family! A lot of interesting things are waiting for us in the new year ;) Thank you for being with me.
With best wishes, Yuri
P.s. I have prepared a presentation and will probably publish it tomorrow.
2020-12-24 17:12:53 +0000 UTC View PostGuys, anyone who has had or has "early access" status write me in Discord. I want to thank you, you will receive all versions of CTR 2.0 and all patches (December 28, CTR 2.0 beta 1 and during January - patches). That is, I tacitly extend your "early access" status.
2020-12-24 08:31:32 +0000 UTC View PostI plan to publish a presentation and roadmap next week. Thanks for your support guys.
2020-12-20 14:25:10 +0000 UTC View PostOn December 28, CTR 2.0 beta 1 will be released for early access. Thank you for your support.
2020-12-20 14:22:50 +0000 UTC View PostThank you all for your support and patience. CTR development is progressing as planned. This month I will finally be able to please the public with the first Beta version of CTR 2.0. Early access is also planned :)
2020-12-02 09:43:38 +0000 UTC View Post
Default Ryzen 9 3900XT 142W , 7100 CB20
Tuning Ryzen 9 3900XT 85W , 7100 CB20
+67% perfomance per watt
My sample is not exclusive, all XT samples show phenomenal results.
2020-10-13 13:46:24 +0000 UTC View Post