Its been about 8 months since I started posting to my youtube channel and started this Patreon; the change in lifestyle has been a complete shock to my space - previously my family room where we would spend our quality time and now soon to be my full-time studio. Ive been slowly doing things in the background to tune up the space and more importantly, tune up my process so I can get things done faster with the limited time I have for my hobbies. This was suppose to be a quick 4-5 day project ...
2025-08-04 22:55:04 +0000 UTC
View Post
Hey Everyone,
In this video, I demonstrate how Chute Tapping works to help with purges sticking inside the purge chute that can cause buildup leading to print failures. Up until now, foil tape has been the only inexpensive solution but its looks.. not so great and leaves residue behind when removed after being installed for a long time. Chute tapping, which is an option within SteinWipe Motion Control, can be enabled by adding the SteinSwitch Definition (SSD) for it to the printer notes i...
2025-07-20 16:28:27 +0000 UTC
View Post
Hope everyone is having a good day!
This is a MUST have for PETG printing. I've been meaning to make this video for a while now and instead of making an overly fancy one with music and flashy transitions to captivate the eye, maybe just something to get the process on video rather than nothing at all - so here it is! This video goes over the best way Ive come up with to simply add custom wipe cycles to any layer of your choosing using the free MakerWor...
2025-07-17 21:18:38 +0000 UTC
View Post
Hi everyone!
I wanted to give you all a proper update on what's happening behind the scenes with the SteinWipe project - and there’s a lot going on.
First off, SteinWipe V2 dev is going really well which I've settled on calling it SteinWipe Pro. It’s still in testing, but so far it’s performing really well! There are a few final kinks to sort out, but this is shaping up to be a solid upgrade over the origina...
2025-07-17 02:55:52 +0000 UTC
View Post
No tricks only treat!
Thats right! From the time the printer receives the download to the time it's laying down filament - 15 Seconds!! All made possible by SteinWipe Version 2 and SWMC - two completely new additions coming to the project 💪
More on this soon!
Leckiestein
2025-06-07 15:58:20 +0000 UTC
View Post
I worked on a feature that keeps the head in motion and extrudes the set amount "Nozzle Volume" helping the purge stay tidy and less likely of sticking to the chute. This is what it looks like in action - I had lined up to do it in the Apr.28.1 release but then BBS and now Orca both throw errors when "sidestepping" SteinSwitch Definition is turned on. It can still be done with a script of course so Ill keep at it to find a solution. It's just a shame nobody got to use it before BBS disabled t...
2025-06-05 12:53:51 +0000 UTC
View Post
"Why haven’t you released Orca yet?! You said April..."
You’re absolutely right to ask. I originally aimed to have it out by the end of April - and here we are in June. So... what happened?
Simply put? SWMC became too powerful for its own good.
From the very beginning of this project, I’ve been battling file size limits. The full SWMC experience...
2025-06-04 17:42:03 +0000 UTC
View Post
If you've ever forgotten to empty your purge bin before a long AMS print… you know how fast things can go sideways. A surprise overflow can turn into a major cleanup (or worse). 😬
That’s why I just released a new video showing how SteinWipe Motion Control now includes an automatic safety feature that pauses your printer before it gets out of hand.
If you’re using a small purge bin, like the compa...
2025-06-01 01:19:53 +0000 UTC
View Post
Hey everyone!
Something awesome happened—Makera donated a Carvera Air CNC for upcoming Leckiestein projects!
Check out this new video where I share my first impressions of the Carvera Air, Makera’s new desktop CNC. And let me tell you... I’m pretty impressed so far, and I can’t wait to start working it into the mix.
As some of you know, I’ve been in the trade for two decades (did my machinist apprenticeship in 2002...
2025-05-30 02:50:07 +0000 UTC
View Post
Hey everyone! I just dropped a new video that I think you’re really going to enjoy—especially if you’ve been following the SteinWipe Motion Control project.
These cheat codes are officially called SteinSwitch Definitions (SSDs), and they’re designed to make the SteinWipe system easier, smarter, and more powerful for everyone. If G-code has been a barrier for you in the past, this is the perfect time to jump in.
In this video, I also give you a behind-the-scenes look at eve...
2025-05-23 04:12:46 +0000 UTC
View Post
Hey everyone, SteinTrack Mains is now LIVE on MakerWorld, Click Here!
I wanted to start this post with a sincere apology—
It’s been over a month since the community voted to make SteinTrack Mains public, and I know some...
2025-05-22 16:34:35 +0000 UTC
View Post
Hey everyone! I’m excited to share my first major collaboration here for the Leckiestein channel—and it’s a big one!
Creality provided me their Raptor Pro 3D Scanner to put it to the test, and the result is a full-length deep-dive video that shows exactly how I use a scanner like this to create real-world designs in Fusion 360.
This tool opens up a huge new opportunity for us on Patr...
2025-05-09 16:57:11 +0000 UTC
View Post
Thank you so much to everyone who voted yesterday! Your feedback gives me clear direction and helps ensure this page stays exciting and valuable for all of you 💪
📺 First up:
The image posted above shows the theme of a new video series that will serve as the new standard for everything SteinWipe Motion Control (SWMC). The co...
2025-05-02 16:53:31 +0000 UTC
View Post
Hi everyone!
Wow—what a whirlwind this last month has been! Between my day job, project dev, Canadian elections, and politics in general - I'd be lying if I said I wasn't exhausted! So I am taking a few days to recharge! In the meantime, the development sprint for the latest SteinWipe Motion Control (SWMC) core flew by, and I’m thrilled to say we’ve landed in a...
2025-05-01 17:02:04 +0000 UTC
View Post
The wait is over... kinda... This release is loaded but there is still a lot more on the way! SteinSwitch Definitions (SSD) are officially here for BBS 2.0.3 (Orca is almost here) 🔥🔥🔥 CLICK HERE for a full breakdown of how SSD works and how to use it. The SteinWipe Motion Control system has officially graduated from...
2025-05-01 02:57:52 +0000 UTC
View Post
Hey Tier 2+ members,
I just posted to the #devs channel in Discord, have a look if you want to check out what I've been working on the last month or so. I am aiming to release this at the end of the month. For the moment it's just BBS because Im finding out its easier to work backwards since BBS is very limited in what can be done. T2 and T3 patrons can have f...
2025-04-25 02:05:41 +0000 UTC
View Post
Hey everyone,
First off — thank you again for your incredible support! The response to SteinWipe and SWMC has been amazing, and there have been so many good conversations happening in the Discord which are shaping the next release of SWMC. It’s been truly humbling to see so many of you diving into the project, testing, and pushing your machines to the limit. Your enthusiasm is what keeps this project alive.
That said, I wanted to address something important:
🧠 Right n...
2025-04-15 17:53:25 +0000 UTC
View Post
It's live!
This release is a special one because it is not only available to supporters of all Tiers, but it is also including a brand new feature to the SteinWipe suite - SteinSwitch Definitions! I am very excited about this feature as it will change how we configure SteinSwitches allowing an array of configurations never before possible. By implementing simple definitions in the printer notes, this will be able to configure the mod from the ground up. From simple qualit...
2025-04-03 03:21:56 +0000 UTC
View Post
Hi everyone,
Several weeks back I asked you guys if there was any interest in a version of SteinWipe Motion Control for non-wiper use that I would make available to all paid supporters, especially the T1 supporters who have been patiently waiting for new model files. The response ...
2025-04-02 18:35:56 +0000 UTC
View Post
Included for Tier 1+ Patrons
Last File Update: Apr.2, 2025 (if purchased, you can download updates here when avail.)
**Important Notes Please Read:
These files are not needed if you own the Dev. Pack listing
Fully tested on X1 and P1 printers (AMS and non-AMS).
Works in Orca Slicer 2.2.0 + 2.3.0
Works in Bambu Studio 2.0 with limited features (BBS lacks G-code ability)
Must insert pause using sliced Gcode file - manual pausing through machine controls is not affected.
Using SteinSwitch definit...
2025-04-02 03:02:32 +0000 UTC
View Post
Hi everyone!
As many of you know, I spent weeks working exclusively with PLA during the development of the Feb.15 Core V1 release of SteinWipe Motion Control (SWMC) — and I'm thrilled to say, based on much of your feedback, it has PLA absolutely dialed in! 💪
A huge thank you to those who 2025-03-27 01:49:39 +0000 UTC
View Post
Hi Maker Tier!
This is the start to the several Maker Tier specific releases to come. Thank you all for being so patient while I work at these additional releases I am able to fork over from SWMC. This listing now includes everything you need to get started and is dubbed "The Basics" because it's everything you need to get your SteinWipe functional with the following steps!
Download and open the Template Custom Gcode file in any text editor then select all to copy and paste the cod...
2025-03-23 22:06:29 +0000 UTC
View Post
Hi everyone,
I just finished the new SteinWipe installation tool programs and I think this should solve the complicated process that once was since launch! All SteinWipe listings have now been updated with the new goods! These files are designed to make it easier than ever to fine tune the position of where the wipe tool paths take place. This will make sure that both sides of the nozzle are getting the best possible clean and will prolong the wiper lifespan. To use the files is simple:
2025-03-23 04:03:36 +0000 UTC
View Post
Hi everyone, happy Friday!
This past few weeks I've been chipping away at the Discord Bug Reporting list; testing and addressing the issues from last release but also addressing some inefficiencies with the installation tools provided with SteinWipe.
To be honest, when I wrote the programs for these helper tools, I didn't think many people would use them but I am happy to admit I was wrong! It is so nice to see SteinWipe users taking great pride in their installs and making su...
2025-03-22 00:29:46 +0000 UTC
View Post
Happy Monday!
Just wrapped up a new video which covers the behaviour of Orca Slicer while using the new security update from Bambu Lab. Spoiler, it's a rough experience...
In other news, I'm just finishing up a few other things which I am excited to announce later this week, too! If you get a chance to head over to the YouTube video page to show this new video some love, that would be much appreciated!
2025-03-17 16:11:13 +0000 UTC
View Post
Hey free members of Leckiestein!
I’ve got some great news—thanks to the incredible people who have boosted the Leckiestein Discord server we now have a custom link - this provoked the idea of giving basic access to anyone who wants to get move involved even if you’re not on a paid tier! This will remain available while the sever is 14 boosts or higher!
As a free member,...
2025-03-13 17:59:10 +0000 UTC
View Post
Hi Tier 2 and 3 Innovators!
It's been quite some time since SteinTrack has seen any real love, but that hasn’t stopped you all from pushing forward with your incredible storage solutions! I’ve seen some fantastic projects shared behind the scenes, and I want to take a moment to thank those of you who always check in before posting your creations out there—your consideration mean...
2025-03-06 00:11:36 +0000 UTC
View Post
It is so hard to tell what is going on inside the little head of a Bambu Lab P1 or X1 printer, now we finally have a way to see what that extruder is doing! This is the first look at a brand new LeckieStein project!
Im already testing this project putting it through the paces! When it is ready, T1 Makers will get access to printable files and T2+ Innovators will get access to the Fusion files. And Of course, if your'e still not a paid patron of Leckiestein but want this project, you w...
2025-03-04 00:37:21 +0000 UTC
View Post
Hey Everyone!
Do you remember that time not long ago when a brave patron gave me their X1C to start on X1 coverage for SWMC before it was even called SWMC? Well, the time has come to actually ...
2025-02-28 20:15:37 +0000 UTC
View Post
Hey Everyone,
It's finally here. The BIGGEST update to SteinWipe Motion Control EVER! 🏆 This has been an absolute grind—hundreds of hours of coding, testing, and refining over the past few weeks (even though I technically only afford about 15 hours per week… funny what not sleeping can do! 😅).
This update is MASSIVE—so let’s get...
2025-02-25 01:40:16 +0000 UTC
View Post
