Adjustable wrench vs 12ga slug
Added 2018-02-25 22:32:48 +0000 UTCJust testing the waters here and trying to stay within a reasonable budget. We shoot a large crescent type wrench from Harbor Freight with a 12 ga. slug. Early viewing for Patrons!
Comments
Get one of the ASO's (Anvil Shaped Object) from horrible freight just to see how tough it is. Even the itty bitty one would be fun to see shot. Aim right for the point/nose to see if it could actually take any kind of abuse.
Clifton Ballad
2018-03-02 15:46:01 +0000 UTCOne thing you guys could do is obtain a crossbow and shoot lots of custom crossbow tips and bolts. Could be fun!
2018-02-27 14:02:41 +0000 UTCGrease gun would be fun.
JimboTheWelder
2018-02-27 01:40:47 +0000 UTCI can relate to this so much, my work always buys cheap torque wrenches, and their reason for it is because they're always breaking. So if it's gonna break, keep buying cheap ones. Surely they're built with the same quality as name brand.
2018-02-26 22:09:28 +0000 UTCHaha, yeah their torque wrenches are bad. I remember at work they bought a bunch of those for the production guys to use to set the torque on some machines and they were terrible, seemed to cause more damage or broke quite often.
TAOFLEDERMAUS
2018-02-26 19:49:19 +0000 UTCWe might use this wrench again at a future date.
TAOFLEDERMAUS
2018-02-26 19:47:15 +0000 UTCTrue, especially in sizes you don't often use. The problem I've had, end wrenches springing open and slipping after much use. For a few bucks more I like Tekton brand, Now for adjustable wrenches the best idea was a Bahhco wrench included in a Volvo tool kit. It has a typical adjustable wrench on one end and a serrated jaw on the other end to loosen rounded off nuts. <a href="https://images-na.ssl-images-amazon.com/images/I/71hssxdbMbL._SL1500_.jpg" rel="nofollow noopener" target="_blank">https://images-na.ssl-images-amazon.com/images/I/71hssxdbMbL._SL1500_.jpg</a>
Eugene Luder
2018-02-26 15:27:48 +0000 UTCI have a Harbor freight torque wrench I can donate, it's so far off made me snap a valve cover bolt, cost 200x what the wrench did. I'd love to see it shot!
Aaronbern
2018-02-26 10:42:34 +0000 UTCI finally made it here! Wow, nice place. Are you going to put that wrench in a giveaway? How about shooting frozen 1gal jugs?
LBCSV
2018-02-26 08:38:30 +0000 UTCNot to bad :-) Wonder if better (harder) tool would suffer more or less because its more likely to break and wouldnt bend. If 22. can split playingcards you should split angle grinder blades :-) Maybe a little battle? Normal one vs Diamond? Thanks and keep on going!
Lutz Sonnabend
2018-02-26 08:16:55 +0000 UTCMaybe a orange HF dead blow hammer. Should be cool in slow mo.
2018-02-26 08:02:00 +0000 UTCGet some of those HF shipping blankets pads and see how many it would take to catch a foster slug.
2018-02-26 07:59:09 +0000 UTCSome of their wrenches are decent. They haven't bent or anything lol
TAOFLEDERMAUS
2018-02-26 07:40:04 +0000 UTCCrescent hammer lose.
David K. Jernigan
2018-02-26 05:28:46 +0000 UTCHarbor F**** is good for cast iron stuff, other things, not so much. Great targets though.
Eugene Luder
2018-02-26 04:35:20 +0000 UTCWhat about a cheap pressurized air tank? With powder paint all around it. Big colorful explosion lol
Christopher Manfredo
2018-02-26 04:24:42 +0000 UTC
