ApolloLander - 2024

included with patronage - USE 7zip on windows - I'm posting the newly slightly updated model of the apollo on a separate store page, so if you don't see the zip here, it's on the other page: https://www.patreon.com/squirrelf3d/shop/apollolander-2025-762128 Use the universal main body for wheels setup. ExtraLock for rails setup on ender3. Common_accessories is now a separated zip Some hotend have a main body labeled SuperFan and UltraFan. Backplates done by request for now. Rail setup on X is meant for a 300mm MGN12H Ender 5 note: please contact me for ender5 main body. needs a little tweak on the main body that I had to remove but need to re-implement for ender5 specific setup, so for now it will be on a request by request basis ( otherwise it's hours of work to do it all at once for al the hotends ) Supported Hotend Bambulab Hotend (2024-03-28 and later: hotend shifted 2mm forward compared to previous version, and improved mount with hex nuts) TZ-E3 (looks like bambulab hotend with creality mount) Creality - Stock Hotend / MK8 Creality - Spider v3 Pro - Creality/Rear Mount (stock plate only) Creality - Spider v3 Pro - Top Mount (rails only) Creality K1 / K1C with unicorn nozzle - X linear rail mount only E3D - Revo CR E3D - RevoVoron E3D - V6 & Volcano - Revo 6 ( I would recommend replacing the cold end with of a v6 with a TriangleLabs "V6DM Heatsink" and use the dragon ST model of the Apollo, as for Revo 6 if you want a revo setup, the RevoVoron has an easier mount) Phaetus - Dragon ST-HF Phaetus - Dragon UHF (with or without extender) Phaetus - Dragonfly BMO Phaetus - Dragonfly BMS Phaetus - Dragonfly HIC Phaetus - Rapido HF & UHF Phaetus - NeXt G Phaetus - Taichi Phaetus - Conch (use BambuLab model, dated 2024-11-11 or later) Microswiss linear rail backplate assembly Microswiss hotend only (Use Creality - Stock Hotend / MK8 version ) TrangleLab - CHCB-V TD6S -> Use Rapido or dragon UHF Apollo model TriangleLab - TCHC TR6 TriangleLabs Dragon Ace (with included metal spacer) -> Use Rapido or dragon UHF Apollo model Red Lizard K1 Pro LukesLab Chube Air Extruder mount for these setup: Orbiter 2.0 (front or back motor, for front motor some have a raised platform allowing the Turbiter to be installed, a cooling fan for it, designed by the Orbiter2 designer, if it doesn't have the raised platform and want it let me know) Orbiter 1.5 (front/back motor) ProtoXtruder 2.0 ( https://www.printables.com/model/822947-protoxtruder-20 ) Sherpa mini Sherpa micro Bowden (use Orbiter 2 rear motor or Sherpa mini backplate, and adapter in "common_accessories -> Extruder & bowden adapter" ) LGX Lite extruder (use sherpa mini backplate and adapter in "common_accessories -> Extruder & bowden adapter" ) APUS Extruder (use sherpa mini backplate and adapter in "common_accessories -> Extruder & bowden adapter" ) APUS2 Mellow Cannon (use sherpa mini backplate) BMG front/back motor (depreciated, as I update hotend it will be gone) Probes: left side mounted bltouch crtouch BTT microprobe M8 induction/capacitive probe M12 induction/capacitive probe M18 induction/capacitive probe Front mounted option bltouch crtouch M12 induction/capacitive probe M18 induction/capacitive probe Rear mounted on ender3 series rails setup only Beacon3D Cartographer Custom model: Spider v2 for Anycubic Kobra, only has the Orbiter v2 front motor. note: if the hotend you want to use the Apollo with isn't listed here, let me know I can very likely adapt it. Some may work as is with certain models.