KB3D

KB3D Air-System

This is the first version of the KB3D Air-System. Designed so you can connect multiple attachments to a single gasmask. With the integrated valves, you can turn on or off each of the connections.

Comes in a 3 valve or a 2 valve design.

The device itself, has a connection at either end, which is not controlled by a valve (depending on your use case, you may want to block of the ends). Then in between those two connections you have 2 or 3 valve controlled ports.

S10/FMJ08/FMJ05/MF11 - MODULES/Side valve V3!!!!

Today I am releasing updated modules which are compatible with all the gas masks listed above. The changes to these modules are substantial enough to be considered a new version.

All still compatible with the V2 insert.

Fleshlight - The curved version of this flashlight has been a WIP for a while. Although the curve improved the chin fucking problem. The module has print problems. These have now been fixed. In addition, the front has been redesigned to grip onto the fleshlight bet...

GP5 Modular System (Reupload)

Hey all,

I think due to my poor memory and the way Patreon works, some folks are unsure about who GP5 module works on what. So I am re-uploading the files so hopefully it's clearer.

The system I am uploading is the Original GP5 platform, which I am now dubbing GP5 Modular System,

This requires removing the valve system on the front following this guide 2025-05-27 19:05:41 +0000 UTC View Post

S10/FMJ08/MF11 Modifications Complete collection - May 2025

Hey all,

I thought I would make this post to update you on the S10. The S10 has been my most popular gas mask by far, but the original posts were done so long ago I thought it's time to post below all the currently used files.

Over the past few weeks I have been working on the flashlight, I think I have a newer version which works well. Over the next few weeks I aim to update many of the modules.

FMJ08 (MF22v - S10.2 - Chinese reproduction): All the fron...

MF11 Fleshlight Module

The 3D printed module for the a fleshlight attachmetns for the MF11.

They are designed to work with the fleshlights here https://www.kb3d.co.uk/product-page/fleshlight-for-mf11

You may have seen these fleshlights before, and they are often found on Chinese selling sites.

To modify, the whole valve assembly needs to be removed from the front of the mask, this requires removing the ...

NATO40 Adapters/Blockers/Valves/Connectors- 2025 Update (Complete Overhaul)

Hey all,

This is a major overhaul and design refresh of all the adapters, blockers, T connectors and breakaway, whilst including new Y connector, and one way valve.

This system utilises the same core mechanism, which improves simplicity and increases customisation options. Utilising there RB rotatable connectors.

Some images below:

2025-02-26 08:37:12 +0000 UTC View Post

Commercial Tier Update

Hi All,

I have just released the first commercial Tier. Take this as a trial run. This is the chastity items.

From my previous post I have changed the terms slightly. Instead of up to 10 orders for the first tier, it's now any number of orders up to a total value of £500.

There terms are subject to change as I am still getting feedback, and will still love more feedback, if you are interested.

This tier is currently set at £20. If this changes, it will not c...

KB3D Aroma Box (RB)

Brand new item. This small gas mask filter like device contains two chambers.

Twisting the box, which change between chambers A and B.

There are three different end plates.

To assemble, take the Aroma box base, so that the small 3 cylinders are pointing up (I.e the base should be flat against the table). take the aroma box body and gently place it on top and align the holes. the holes should be back to back with the base. if you align the holes, the one of the set o...

KB3D Smell Box - RB edition

Here is RubberBunkers version of a smell box, It's designed on a typical filter. It uses RubberBunkers rotatable valve system.

I have tested it to function with my Bambu lab X1C.

I have re-uploaded the female/male connectors and inserts although the are the same for all the rubber bunker items.

Rubber Bunker Originals- Originals

This is the 7th file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will eventu...

Rubber Bunker Originals- Other Masks

This is the 6th file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will eventu...

Rubber Bunker Originals- GSR

This is the 5th file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will eventu...

Rubber Bunker Originals- S10

This is the 4rd file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will eventu...

Rubber Bunker Originals- GP5

This is the 3rd file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will eventu...

Commercial Tier Updates

Hey all,

Over the last few days, while procrastinating from my actual day job, I have been thinking about the Commercial Use. I have put together a draft 1 of the agreement.

I would love to get your feedback. I think (might be wrong) but most of the agreement is sort of assumed. But please if you have concerns with any aspect of it, please let me know either via message or comments below.

The main thing I am thinking about is the cost. Is the cost fair? I fully accep...

Rubber Bunker Originals- Tubing

This is the second file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will ...

RubberBunker Originals files - basic parts

This is the first file dump of RubberBunker files.

These are the files directly from Rubber bunker, I have not tampered with these items.

Because these are not of my design, I will be unable to assist with any concerns with these files.

The unique systems and modules designed by rubber bunker will eventually be put onto my store once I have gone through, tested and tweaked them all. so if you do not wish to try and work it out yourself from these files, they will e...

Commercial License? your thoughts

Hey all,

So at the moment there are a few things I do not sell. 1) I don't sell my chastity cages. 2) I don't sell any of my items to the European Union (Due to EU law).

I was asked by a member about a commercial license for chastity. As I currently do not sell my cages. It would give members A) the opportunity to make a little money, B) give people who do not have access to 3D printers to get the cages.

But I could also offer a commercial licence for items be...

NATO40 switch

So the first item which has been modified has been the NATO40 switch. Although I released this not that long ago, the new rotatable NATO40 connectors had to be added.

So to assemble,

effectively the Male/female inserts are first placed into the NATO40 male/female. You should have a bit of the tube sticking out of the bottom. This is then pushed into the switch body.

These items are designed to be push fit, if you need, you can adjust the size of the inserts. The inse...

RubberBunker Acquisition

15th Jan 2025: So I have had a thought, discussing with some of you and I have come to the conclusion that I will upload all of rubber bunker files unedited, just as I was sent them. There for you can 3D print spare parts for items you may already have. Obviously the standard terms of this Patreon, as with all files, they cannot be sold on. This is only for personal use. If you do print items, and you share on social media, please tag the Patreon/ or KB3D/ @kinkybiologist :)

SodaBubbler Mk2

Good morning all :)

I have just attached version 2 of the sodabubbler. The changes mainly include having a NATO40 connector on the import.

This allows you to attach additional items to the bubbler, for example a smell box, poppers attachment or just daisy chain extra bubblers.

I have also included the mk1 as well as the FF adapter. The FF adapter is the most common adapter needed for the input of the bubbler, as the Bubbler mk2 is also a male to male adapter.

<...

NATO40 Switch

Hey all,

I have designed a new NATO40 switch. I had designed one a while back (I'll be honest, I cannot remember if I uploaded it), but the issue was it did not let enough air through.

This new design is based on the old one, but with massively increased airflow.

The way it works is, once fully assembled the side opposite the twist handle is always open (I imagine connected to the gas mask), then twisting the handle will change between the left side and the right. 2024-11-23 23:38:25 +0000 UTC View Post

Chastity V5 - Mega mk1

I have attached the Narrow, Standard and wide version of the Kilo cage. This is mk1 of this cage. I have not been able to test it yet, but I aim to print this over the next week or so. if you test it let me know

haven't finished printing these, so there maybe some changes, but I expect this to be the mk1.

Width - 38mm and 41mm

Length ~70mm

Chastity V5 - Kilo mk1

I have attached the Narrow, Standard and wide version of the Kilo cage. This is mk1 of this cage. I have not been able to test it yet, but I aim to print this over the next week or so. if you test it let me know

haven't finished printing these, so there maybe some changes, but I expect this to be the mk1.

Width - 32mm, 35mm and 38mm

Length ~60mm

Drone Dog Hood - NATO40 adapter

Hey All,

Here is the Drone dog hood to NATO40 adapter. With the additional blocker to block the air hole at the bottom.

This was designed to work with the Furrjoi drone dog hood.

KB3D Chastity Cage - Double

Enjoy locking together two chastity subs ;)

This is in the cell style. I have not printed it yet, I aim to print it this week. Should be compatible with the V5 rings. I aim to make multiple lengths in the future.

KB3D Chastity V5 - Cell

The first of the new styles for the V5 cage. The cell.

I aim to upload a new style each week. I will edit this post adding new styles, so you don't have to search through multiple posts.

-Atto - Uploaded 16/09/2024

-Femto - Uploaded 27/04/2025

-Pico

-Nano

-Micro - Uploaded 02/09/2024

-Mega - Uploaded 27/04/2025

Rough size guide:

• Atto ~5mm Length, Width: 32mm, 35mm and 38mm

• Femto 10mm Length, Widt...

  2024-09-02 07:09:46 +0000 UTC View Post

Chastity V5 Mk2 - Solid

Chastity cage MK2.

This Post contains the latest Solid V5 mk2

Rough size guide:

• Atto ~5mm Length, Width: 32mm, 35mm and 38mm

• Femto 10mm Length, Width: 32mm, 35mm and 38mm

• Pico 20mm Length, Width: 32mm, 35mm and 38mm

• Nano 30mm Length, Width: 32mm, 35mm and 38mm

• Micro 40mm Length, Width: 32mm, 35mm and 38mm

• Mega 70mm Length, Width: 35mm, 38mm and 41mm

The Shoe Mk2

Hey all, below I have attached the latest version of the Shoe. I should have done this significantly sooner.

The newer version is much larger than the older version. filling the shoe better. The airflow design of this actually comes majority from the bottom of the shoe. Not from the voronoi vents on the side. This is because most of the smell comes from the bottom.

I hope you horny devils get as much use out of this item as I do.

in collaboration with @...

Chastity tongue - 27 May 2024

30/05/2024: Another day, another try. This time following the advice and suggestion of Logan Night. to avoid the poking. I have gone back to the original and only shrunk the tongue around the ring, leaving the back portion larger. let's get this on the printer to see. - MK4

29/05/2024: Apologises for changing things so fast. This is the method of which I iterate. So just uploaded mk3. I found the edges on the last tongue a bit sharp. So although the tongue has significantly shrun...