Marko Makaj

Bryar from Andor - almost done :)

 So its still a work in progress, im redoing the grips, not feeling them just yet, so will sculpt new ones, and still doing some test printing, and then i'll wrap it up :)

I've seen quite a few releases but going a bit in depth i've noticed all of them had quite some huge inaccuracies. 

I hope there is no need to mention it, but for new members i would like you to know i'm not just making models to make models, there is quite allot of accuracy research done behind those,...

Andor blaster rifle sizing fixed and reuploaded :)

ok the Andor blaster rifle sizing adventure is over now :D haha

So i made a miscalculation on the 3d scan and even tho proportions were good, the scale was not :D

All parts have now been reuploaded, so just download again and you can print it at 100% scale with ease of mind :)

for comparison i added the grip sizing that is similar to the one from the dc17 realistic since it has the same trigger mechanism - the one on the rifle is a bit larger than the dc 17 , and the overall...

Andor - sizing !!!!!

Ok, turns out the Andor blaster is a bit oversized - wich is a bit weird bcs based on my calculations and meaurements it shouldnt be, but the test prints made by the community say otherwise :)

Please stop printing the blaster if you started , and give me a day, ill verify and reupload the correct scale. I'm at a cosplay convention at the moment here in croatia but im back today evening/tomorrow so will take care of as soon as i get back :)

All my blasters should be printed at ...

Andor :)

The unnamed blaster from Anodor is ready for printing :) 

  For something that appear simple at first, this sure went into a unexpected direction :D  

 To make it all easier the project is split into 8 segments: 

1. ADJUSTABLE FLASHLIGHT HOLDER

2. FLASHLIGHT 

3. FUNCTIONAL TRIGGER 

4. HOOK 

5. LOWER GRIP 

6. MAIN BODY PARTS ASSEMBLY 

7. SCOPE 1 

8. SCOPE 2 

 ...

Knife stands

IMPORTANT THINGS FIRST -   

Patreon messages are not working for some reason, so i am not able to send out links and answer your requests at the moment. I hope this will be fixed soon :)   

Now for the stands - There is a Croatian (for those who don't know I'm from Croatia :D ) cosplay convention this week, so one of our very own patreon members will be displaying some mysterymakers good. 

For that reason he has asked...

Andor info ??

I thought i's start with the blaster i havent seen made yet. 

 So im modelin gthis blaster from Andor, however, does anyone have any more info on this ?   

ALl i have are limited references, and i would love to learn more if possible :)   

any help, tips, or suggestions are welcome :)

3 new items added for "we are makers" tier :)

New month is here, so to start, here are 3 new items :)

Halloween is almost here, so i added 2 more items to circle up our Sandman set -  and we're always in a need of candy bowls, so i present you

1 - Sandaman's pouch candy bowl - yes Sandman's dream sand pouch can now be used as a candy bowl. Instead of pouring out sand into peoples hands, you can do that with candy now :) Several verions included if you wish to give it an extra realistic touch :)

2 - Sandman dream...

The Sandman - Dream's Helm ready for printing

Here we are :) The Dream's Helm is uploaded and ready to be printed :)

A bit about the project:

Oh wow, this was a fun one for sure, the details, the shape, so weird, so many things to figure out, but i loved it :)

The entire helmet comes in 4 parts (ideally) , the helmet base, the front piece of the mask , spine and lenses.

1. The base mesh helmet! - the curvatures and shapes prevent us from doing any reasonable cuts. Every time I thought of separating plates or "b...

Dream's helm almost ready :)

The much awaited helmet from the Sandman tv show is almost ready :)

i thought it would be done today, but still have some minor things to do, so it will be released tomorrow.

Available to all "we are makers" tier members.

Hope you are excited as i am :) 

Yautya goodies

First of many Yautya gadgets done :)

So what do we have here ? 

inspired by the latest Predator movie - Prey, i started with some gadgets where we had good references available. The team did a fantastic job with the props on the movie and im sure you will have much fun recreating the props as i did :) 

First one - the wire net: 

The models come in 2 versions - solid and hollow . Good thing is NO SUPPORT needed for any of it. Th...

Goodies part 1

As you might know, i have quite a few things open, so i wanted to post it all at the same time, but that might be quite confusing so im gonna spread it out a bit

so today i’m sharing with you as follows:

1 -  The ronin hilt is still to this day the most popular one, so i have created a desk stand for it - something i call, the cyber ronin stand :) Added to the patreon folder :)  - prints with no supports

2 - DC 17 textured grips for filament printing had some e...

LINK AT THE END - DC 17 babyyyy !!!

The DC 17 Realistic version is here :)

Sometimes i get asked "why aren’t there more models in a month" - well the truth is, i do try, i really do, buuuut tend to go overboard with modeling, engineering , making it as best as it can be with as much addons, care and easy to use as it can be, and i’m afraid that is quite time consuming, nut no panic i will be working at this even harder :)

Sure it's easy to make a static model, and pop up one after another, but it's the funct...

Another month !!! :)

Ok guys, the new month is almost here - give me a day or 2 to get it all ready and let's begin :)

I’ve been asked about some prediction, some models, what's new - well, truth is, ALLOT is going on - not only in the modeling work but the entire mysterymakers platform :D

Ok, let me share some of it with you - also, keep reading. I will need your suggestions on some models, but will make a poll on this one as well.

What's new ? It's no secret i keep jumping back and forth b...

Daredevil billy club - functionality test :)

OK, so here are the printed parts, and a short video on the functionality of the billy club from Daredevil

The video qualiy could be better, but just wanted to show you what it looks like

also, i used a rope, tried to paint it, failed, so it looks dirrty XD - that being said, you can use any rope or steel wire, the result...

Daredevil updates and print suggestions

Daredevil updates :)

!!!! Video on facebook group _ patroen doesnt allow to add videos next to photos :D"!!!!!!

1 - the cowl - i added some details on the side that were "missing" on V1. Now there are several reference images so now we have 2 versions to choose from, the latest should be the most accurate to the show :)

2 - the cowl - the little edge under the nose had too deep of a cut so when you tried adding support to that part they were hard to split. The cut is now mo...

Daredevil billy club - functional

And yes - it is functional :)  

 It has a twist lock mechanism on each side that allows you to go from 2 seperate clubs option to staff option to "nunchaku" option. 

  I have test printed and adjusted the print tolerances, so it should be a bit tighter fit at the end with is ok bcs we need it to hold tight. I'm also quite surprised at how well it all works :)  

 if you will need even tighter tolerances, just provide some feedback and we'll ...

Updates, updates updates :)

Ok, as i mentioned on a post while back. I've been taking care of many small requests you had for files, and out of the bunch here are some that i think will be benifical to all and will either improve the set, or they just made sense when you asked me to update it, so i did :) Thank you all for activelly participating in all of this, so let's take a look at some updates !

1- batarang - special thank you to  Mike Schmidt for taking the time to research and test this option. The pi...

Daredevil cowl

Finally it's done :) It may not seem like it, but i punched in total of 50 work hours into this :D I wasn't happy with the shapes, and now i think it's as close as it can get:D

I used a 3d scan of my head when making the model so it should fit on 100% for many people. As always i do advise to double check the scale when printing it , and since there is not logical way to split the helmet/cowl , you can just use plane cut or "cut" in the prusa slicer if you need it :

Meshmixer tu...

Another lightsaber - functional ofc :)

Can't help it, I love making 3d printable functional lightsaber designs .  

This time something that i haven't seen a decent model out there.  The Darth Talon hilt.   

First a special thank you to Luke Beardall for going back and forth with me on this one :)   

Story time - as most of you might already know Darth Talon's lightsaber was made from dark coral, so i envisioned the design as something made from coral, ofc with coral texture, as well ...

Vacation over and new model added :)

This is it, vacation time over. Thank you all for your patience , the vacation time was lovely, but im back to work now :) 

And to jump right back in here is the Umbaran blaster rifle.  What's different about this one ?  

Well from the photos i kind of got a feeling it has a slightly oval shape so i wanted to recreate that, but the most important thing  i wanted to make is something that would allow us to  combine our resin printers and filament printers. ...

August - work in progress

And yet another month is here :)IM gonna switch things up a bit , but nothing too harsh :)

I still have a few vacation days left, so will be traveling back home in 3 days, so i am working at a slwoer pace, however the first model of the month will be ready soon :)

Its the Umbaran rifle - this was recommended a while ago, and i always wantedt to make one with led's or glow effects. I  finally i took the "vacation" time to figure out the build, so you can see a work in prog...

Bicep armor + a Spartan finger ring

My dear patreon members, here are 2 more "updates" :)

I first have to say i love playing with 3d scan data, makes things much easier to put into scale and perspective :)

So the first “update” is another part of the Bat's armor - the bicep armor.

As per usual i added several options to print, so now you have

- 1 with straps combined / 3d printable
- 2 without “straps” to use with a real life fabric/strap and buckle
- options 1 and 2 with and without st...

Hinge update and Rupublic riffle added

1. OK, Republic rifle first - the trusty weapon of our Havoc trooper.

This was originally and still is a part of the Havoc trooper set full body armor. However since i released the Havoc statue i was asked about this rifle all the time, sooooooo yeah i decided to make this "standalone" as well :)

So now you can download and print the republic rifle both 1:1 scale and 1:12 th scale :) Was thinking to do the same to other havoc weapons buuut that might diminish the 6 month reward ...

It's the bat ;)

Ok, finally some of the batt stuff for the "we are makers" tier :)

There is a new folder now in the patreon monthly projects called "The Batman".

yup i've been a bit busy over the weekend, and as always i couldn't help myself but to add some functionality to all of it :)

So i will release batman armor in parts, lets call this part 1, bcs there will be a lot in there :)

ok let's get started, what is included for now:

1- batarang or the tactical knife - i want...

Phase 2 animated helmet rady for download ;)

And finally it's here, the long awaited Phase 2 Animated helmet.

Once again I was proved SW helmets are one of the toughest to make out there, so ofc i did need a bit more time. However I did also add some extras to make use of that time, so i tried to cover all print options i that i think you would have benefit print the project folder included are a total of 13 print options to choose from ( removable back plate with magnet slots option, precut dome removed option, fully combined op...

Lola59 schematics and code + another WIP

Ok, Lola schematics and code are in the folder and another helmet is also almost ready :)

So, Lola59, let me explain :D

- in the image you will see arudino uno - i use this for testing, but for the size it is recommended to use arudino nano ( layout is still the same )

- the code is structured in a way so there are 7 so called "scenes" or movements, and once those movements are done , there is a randome delay time untill the loop starts over

- you can play with ...

Obi-Wan Kenobi lightsaber uploaded

Sorry for the delay, i will be sending out the links for this month to you inbox as well shortly :)   About the lightsaber project :)  Whats included:

- non functional version, functional version, belt clips

I adjusted the design slightly so it can fit electronics that are once again hidden inside the blade, and I fused the parts so they give a maximum structural strength. I didn't want to scale up the hilt given I've used screen accurate dimensions, so I hope I man...

Updates and Lola fix uploaded

Just a few little updates form me :)

1 - As some of you know, I've been working on a screen accurate Obi-Wan Kenobi's 3rd lightsaber. So far I have managed to recreate most of it according to scale and details, but there is still a bit of work to do.   I will add a non functional and "functional" version to the projects as well.

The functional one will be quite interesting, I might need to adjust the scale for that one, but using jumper cables and reinforced neck we will...

June and July folders linked - summer madness folder

As i mentioned in the post the other day, i have linked the June and July folder, so everything made in June and everything i will make in July will be available here

DOWNLOAD HERE
https://drive.google.com/drive/folders/1EvGTg1Q3XU5sw50IYF-Qzm-nS0ajSp8T?usp=sharing

Yes tons of new models are coming this month and all of them will be available in the lin...

LO-lA59 DROID READY FOR LAUNCH !!!

Finally its here, what you all have been waiting for :)   that was quite an intense build, so let me walk you through it :)   1 - yes there is both functional and nonfunctional versions included in case you don't wish to mess with electronics

I have also included a little "pdf" book if you wnat to print it out to use for easier assembly :) 

2 - the entire build is split up in 3 segments  : top portion, lower portion and legs/stand

3- all servos...