So we are gettign closer to the finish line :)
Here are some updates :)
- added more internatl details ( still need to add the antenna)
- 4 led's in total
- 2 servo's for flaps
- optional servo for the eye enabled
- legs will be magnetic/removeable
And just need to find room for the eye servo, and wrap up some leg details and other left details, and it is ready to be splitedd and prepared for printing :)
so not much mo...
Hi everyone. By now you might have noticed some of the links have been shut down. And you might be confused as to why you "no longer have acess" to them ?
So you still have access to the files and folder you had before, nothing is removed and nothing is taken away from you :) There is just now one extra step put in place to secure unwanted file sharing and there is a reason for that wich happened just yesterday.
There was a person sharing and selling links and files from this pa...
Another Lola droid update :D
Having such a blast with this one :D i can't wait to print it all up, so what i added now
- created the shell so it's printable without any supports, and has all the necaserry offsets and mounts so led's and servo's can fit.
- the electronics will therefore be easily accessible and exchangeable if needed
- i wanted the final look to have a real droid feel, and that means hide everything that makes it work. So I designed the servo mounts and...
2022-06-17 11:45:20 +0000 UTC View Post
Just a little update what i'm working on.
Yes the lo-la59 droid - finally. I was hoping to have it all done by now, buuuuut run into some issues.
I tried to have the accurate size while at the same time to incorporate all the movements, so i found a balance between sizing and electronics, and i hope this will prove to work.
so what phase it is in:
- working on easy access and implementa...
2022-06-14 14:48:17 +0000 UTC View Post
Yet another Kenobi goodie is done :) In the "we are makers" June folder:
Its the device he uses to track signal in episode 2
Now as always i did add something special to this one as well :
1 - it has clickable buttons - they use 3x15mm springs ( link included)
2- i created a jpg and psd 2D drawing that you can print out on regular printers and place to imitate the screen :)
3- screen panel is thing and removeable in case you wish to add real glass or something else<...
ok ok, i've been busy, but this is just one of the parts i've been working on :)
once you see this one, it will become clear what to expect on the other models :D I've been focusing on kenobi props, bcs there weren't too many, so i will most likely make all :D
this was supposed to be released with the rest, but i'll be adding them as i finish so i don't spam too much :D
Ok, this is a tiny and a LARGE one at the same time , so let's begin :)
The Jedi image caster ...
2022-06-07 21:52:15 +0000 UTC View Post
This is it, forry for the slight delay ,but the 1/6th statue is not ready and uploaded :)
Now i dont do that many statues so i figured id use this one as a learning curve as well
So, im looking forward towards your feedback and seing some prints, im gonna toss this one on my printer as well :)
as always, i will send out the new months links withing a day or 2, when all the pledges are processed, but if you're in a hurry , feel free to drop me a message :)
OK, new month is upon up - patreon has started processing the pledges, adn as soon as its done you will have access to new months folder ( June) .
____________________________________________________________
IMPORTANT
- printer and filament winners will be announced tomorrow ( 2.6.2022. at 3 PM CET live on my IG -
https://www.instagram.com/mmmmystery/
________________________________...
Hi fellow makers, i just wanted to share a little "whats been going on" :)
As some of you know to be able to produce some nice models, lots of patreon work actually gets done "behind the scenes" , those are the parts you dont see as often, but i assure you the time and research placed into each project is quite intenslly filled up, so this time i wanted to share with you what that looks like a bit :)
People usually ask "what models will i be...
2022-05-24 19:37:30 +0000 UTC View Post
It is no secreet im working on multiple stuff all the time, jumping back and forth , so here and there i just go and wrap up an item that i had in my mind for a while :D
We have the Lightsaber and the Lighthammer, so its only appropriate to add a LightMace to the collection ( yup LightAxe comming soon :D )
The idea is rather simple, as is the print - it uses the Aliexpress Lightsaber electronics, however you can use any other neopixel hilt as well, and you only have a few item...
My mini vacation is over, and even tho it was absolutelly fantastic, i did miss working on some items a bit :) So straight up jumping with another item i simpliy had to do the moment i saw it
Its the blaster from the upcoming Obi-Wan Kenobi series. We dont know much about it, and have limited references, so i did my best to attempt to recreate it. Once we get some new images i will update it if needed :)
As always it is split in multiple parts for easy assembly, but i also add...
So i finally started on some Kenobi goodies - ufnortenately i didnt manage to wrap up the blaster and binoculars in time for todays release, buuuut i will pick it back up monday :)
why monday ? well i'm goin on a little getaway weekend so even tho i will be away from modeling and my pc, i will still be available for whatever you need, so don't hestitate to reach out :)
So the blade is as always made in multiple parts, and i added a 3d printable textured handle version as w...
Yup, as promised, here are 3 desk stand versions
- minimalistic one
-Rocks and
-Asgard type one
Yup i will add wall stands at some point as well, and will most likely make another "rocks" version, its not bad, but i think it could be better :D
Added to the "mjolnir" folders in the "we are makers" tier :)
Well here it is finally - the Mjolnir pack :D
I know there are quite a few models out there so i had to do a bit of extra to make it worth your while.
Included are:
- Regular Mjolnir - i created the body so its easy to print without supports, and added structural strength. There is a 10mm dovel intended for the hilt, and 8x8 pins or magnets to be used at your own discretion depending on what you would like more :)
- Love and thunder Mjolnir ( both damaged and with h...
Here's something i wanted to try for a while now, and with Kenobi coming out i figured it would be good time to finally give it a shot :D
Yes, building props is fun and all, but what about printing something and then playing with those prints ???
SO i've created the 3d printable puzzle set , using our obi wan kenobi builders group cover as inspiration :D Oh and i apologise if Obi is a bit dorky looking :D
The siize of the puzzle is...
2022-05-06 15:13:58 +0000 UTC View Post
Here it is, all parts printed, and tested, and it works just as intendeed.
The middle screw mechanism works great, so does the screws on the side
One thing i have forgot to mention is - the left baton "body 1 and 2" screw clockwise, while on the right one they screw counter clockwise - i've added a photo for that to the folder as well :)
I used 4 rubberbands for the inside and that seems to be the perfect tension to bring the chain back into the handles.
The chai...
The Batman build - yes finall, i've started that one - so one thing i love about the Batman build is we are FINALLY getting a real life Batman armor, one that is actually functinoal. Batman armors were always dope, amazing buuut sci fi - however now we have the closest we can get to a real life batman build :)
To start and to display the fucntionality i have create the Baton, that's one of his tools. Eventually i am gonna create all tools and weapons he is using :)
The baton h...
Ok, ok ok .... all this moon knight / ancient egypt work (wich i absolutelly love) lately has reminded me of an old cartoon i watched as a kid. Mummies alive :D!!!!! thats right , do you remember that one ??? :D
Felt a bit nostalgic about the 90's and i do rememer always wanting that Amulet of Ra Presley was wearing arround his nect :D
Well, decades later and 3d technology available, i figured i'd just recreate it , and hope someone will share the same excitement abo...
Im happy to hear everyone loves the scarab with all the added functionality :)
So ofcourse i added one more :D
I thought it would be super cool to make like a wooble display version thats just "in place" and sturdy enough you could display it on your cash dashboard, desktop and other, simillar to those wobble heads :D
So i added another folder called "spring wooble version" and i seperated the plastic strip wooble version to a diferent folder.
I also included t...
Finally its here :) the badass looking Scarab compas from Moon knight :)
Quite a few challenges with this one ... how to make the wings flap open while maintaining printability on filament printers and keeping the prop size small, how to display it both with or without stand, how to make it appear as if its floating .... and so on :D
So i think i've managed to take care most of the "issues" , so now we have both filament and resin compatible little scarab that can "float" on its...
Ok, i might spam you a bit over the next few days, but i dont think you will mind :D
Yes, the long awaited Crescent Darts from Moonknight . Reason why i was postponing anything moonknight related for so long was ....well, details :D i wasnt happy with the details we could or rather couldnt see so i waited untill we had a decent estimate of the props.
As always i made multiple versions:
1. Double sided version
2. One sided details version (but still curved)
3. ...
So i wanted to realease this one with some other models i've been working on, but i figured i'd just toss this one out, so you still have enough time to produce some before Easter :)
Its a little tradition thats been going on now, and i'll try ti make one for every holiday , and so far we have the Pumpkin'O'Lorian (Halloween), Christmas O'Lorian (Christmas), and now the Egg'O'Lorian ( Easter)
I've added both the egg version and one with flat bottom so you can print it stadinng u...
Dear Patreon members, just a quick note that the new month link will be sent out on the 6th this month. All new projects will be added to this folder for this month :)
I am traveling for my medical checkup, and will be away till wednsday evening so i will send them out then , as im allready in the way to the airport :D
Thank you for understanding :)
New month, new stuff :)
First of all i would like to thank everyone who is with me for yet another month, i truly appreciate all your support and i did say it before but cant say THANK YOU enough for allowing me to continue this kind of work :)
So i've been working on quite a few stuff at the same time so as i'll wrap them up i'll just post them, so i will try my best to add as much as i can this month, much more than last month, last month was kind of slow :D
OK, so firs...
So i've finalyl updated some Bobf armor parts:
- jetpack cones, neck piece, left lower gauntlet and neck piece to make it more accurate accorgind to references
I didnt update the helmet just yet bcs i still didnt get my head 3d scanned so i can use it as a fit base mesh, so hopefully soon !!
I have also completed the 3d printing and assembly of the scorpenek droid, and oh boy, not sayig bcs its mine, but its amazing :D ( photos attached) - i took photos and videos...
So, this is what 10 days of work looks like :D
The Scorpenek annihilator droid is finally ready.
You will find i have once again added several versions for you to choose from. I made it slightly bigger so its compatible both with filamlent and resin printers.
There is an all parts assembly, one where the legs and arms are combined and one fully combined for small scale resing printing.
Some parts are also construccted in a way the dont need any suppo...
Ok guys, in case you still haven't gotten anything ready for the International woman's day for your female loved ones, i hope to be able help with a last minute "little of something"
It was my intention to build something as a token of appreciation all the ladies in our life. The idea was to make an abstract model with feminine features with a sort of a hand/flower kind of lines, but ofcourse i couldnt stop there, so i added several options like room to include led's at the bottom , di...
Went back to SW Vision lightsaber, so i figured i'd go over the top on this one as well :)
One of those lighstabers stood out for being very stylish and detailed, and thats the Family heirloom Lightsaber from episode 8.
So i added several things to it:
1. functional version as with my other blades - you can now insert your lightsaber core electronics and blade to make it functional
2. non functional - for those who want a display piece
3. a stand that works...
2022-03-02 13:08:47 +0000 UTC View Post
Dear Patreon members, as promised i have created the schematics and the code for the rangefinder movement.
Its also an introduction to an open source coding portion of my (soon to be ) web page, where i'll try not to provide only 3d printable models, but would love to include a wider audience such as tech savvy peple and coders to share open source code/schematics to acompany our prop, cosplay and mini's builds :)
Yes static props are cool, moveable props are cool, but lets try...
As requested i have done several updates to the revolver/cad bane blaster _:)
So what i've done:
1 - made all combined version for 1851 colt, ornamental colt and cad banes's blaster so its now 3d printable as as small scale version os as a static (non functional) 1:1 prop
2 - created a minimalistic desk stand for the blaster so it can be displayed on the desk standing up
3 - created a minimalistic wall mounts - there's left and right one, they are slightly...