SUKIMA SANGYO

Additional video: Instructional video on how to draw a gradation on the eyelash with a brush

Highlight expressions on the eyelash can be reproduced by dotting with a brush without using an airbrush.

It is faster than using an airbrush and does not look bad, so I recommend it.

I think it is one of the blending techniques, but it is not as difficult as it seems, so I will actively try it from now on.

*This is done with enamel paint

Pass: faYae5fE

Asuna Bunny ver. (sculpted by Tomogomafu) wip part3 to completion

◗ Eye painting

Since it is not interesting to use examples or as is, I tried to draw the eye paint with a slightly different atmosphere from the examples and official illustrations.

I decided to go ahead with the body, as it looked fine when I tried to match it to the body. The only differences are the position of the eyelashes and the angle of the eyebrows...

but...

Asuna Bunny ver. (sculpted by Tomogomafu) wip part2

◗ Dry fitting

After sanding the entire piece, temporarily assemble it (dry fitting). First, consider how to ground the base and high heels.

You could use geta parts as they are, but the whole hair part is heavy and the axis of the foot is made of resin, so it is a little too heavy...so I changed to a stainless steel round bar.

This clear geta was made by molding...

Asuna Bunny ver. (sculpted by Tomogomafu) dryfitting photos

Formative beauty that does not require painting...

Asuna Bunny ver. (sculpted by Tomogomafu) wip part1

The world is now in the age of bunny wars!

While bunny figures are being produced like demons, Asuna Bunny Girl ver. by Tomogomafu's prototype was sold as a garage kit.

It was re-released just a few days ago on September 15, but sold out in a little over 2 minutes. It seems that there will be another re-release in October, so if you missed it, be sure to check it out!

So this time, I would like to summarize the production process of my Bunny Asuna from the v...

[Prerelease video] La+ Darknesss sculpted by Fujiyama sankaku

This is a video of the making of La+ Darknesss (pre-release version). The video data was so large that it took a lot of time to edit the cuts.

By the way, the video does not show the pacifier being held in his mouth. 

You can only see it in pictures!

pass: jiG54Ege1

[4K Video] La+ Darknesss check video

4K video to check the overall atmosphere and texture. There is no particular direction, but it would be good to have it for production reference.

Please enter the following password to view

jiG54Ege1

[4K Video] La+ Darknesss review shot

This is a high-resolution version of the video previously released on Twitter.

We tried a slightly different shooting method and editing than before.

It looked like it would have a cool composition in terms of atmosphere, so that's what I tried to make it look like.

Please enter the following password to view

jiG54Ege1

[Photo Album]Fujiyama Sankaku - La+ Darknesss 2

Sculpted by Fujiyama Sankaku

Personally, I like the cute expression on her face when she is sucking on the pacifier!

[Photo Album]Fujiyama Sankaku - La+ Darknesss 1

Sculpted by Fujiyama Sankaku

[Random note]There was so much to do, I thought I was going to explode!!!

It has been a while. Thank you so much for all your support...!

Last month I had a bit too much to do and was not able to update Patreon nearly as much as I would have liked, but it appears that I have a lot to do this month as well.

I have already posted photos and a video (ahead of time) of Asuna Bunny, and I plan to write an article about the making process as well. Also, I would like to update Laplus Darknesss in the same way, but there is no production video and no...

[Prerelease video] Blue Archive Asuna Bunny ver. sculpted by Tomogomafu

Here is a video of the making of "Asuna Bunny" that will be released before Youtube.

Pass: U7ghr8a3Ifav

[4K Video] Asuna Bunny(Tomofomafu) ver. review shot

Here is a 4K review shot of the Asuna Bunny.

The modeling of this Asuna was very detailed and strongly motivated me to create it!

Pass: U7ghr8a3Ifav

[Photo Album] Blue Archive Asuna Bunny ver. sculpted by Tomogomafu (Hamin_gja)

Sculpted by Tomogomafu 

Salepage(Pixiv BOOTH)

https://tomogomahu3.booth.pm/items/3890090

I made metal cards with logos!

I basically making GK for my own enjoyment, but thankfully, I sometimes receive requests from dealers and individuals.

So I have been thinking for some time that it would be nice if I could make a kind of certificate of finished. So I decided to make it . I will enclose one with every commission I receive from now on. (It is a metal card).

* I do not basically accept commissions, but only those who happen to contact me when I have time.

[Asuna Bunny wip 3] Color mixing and painting, eye painting process - to completion

I had been thinking that I should finish the Asuna Bunny, but I had other things to do, and as a result of all the sanding I had been doing, I had put it off until I had finished it.

I had finished it, but I thought the expression was not good, so I decided to repaint it. Well, it's not what I was expecting! It is a common occurrence when you work with rubble, so it is nothing to worry about.

There is no end to the self-satisfaction in making rubble... It is not over until you get...

[Random note]Expected release date of Bunny Asuna making video

We have been painting two types of bunny Asuna for several months now, and finally both are finished.

I will now start editing the video, and one will be available to the public around September. Looking forward to it!

2022-07-09 02:12:03 +0000 UTC View Post

[Random note]Having Sanded all six kits I am tired of this process!!

I suddenly felt like sanding, so I sanded 6 kits.

I was actually going to sand 7 kits, but I got bored doing nothing but sanding, so I stopped halfway through. It can't be helped.

It was these kits that were sandinged.

• 水着沖田総司
• 玉藻の前（水着）
• 水着大人ゆきかぜ<...
  2022-07-02 18:38:06 +0000 UTC View Post